cable for go to AUX port of 2501 to modem (V24)

Thread View: comp.dcom.sys.cisco

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Patrick BONTANT Wed, 10 Apr 1996 08:40

#1951

Author: Patrick BONTANT
Date: Wed, 10 Apr 1996 08:40

5 lines
588 bytes

Could you help me?
I search the schema for a cable cable to connect a AUX port to a modem
It's the same than the CONSOLE port?

Thanks!

Re: cable for go to AUX port of 2501 to modem (V24)

#1953

Author: Barton F. Bruce
Date: Sat, 13 Apr 1996 11:06

17 lines
1317 bytes

In article <4kfs6d$iv4@obelix.rain.fr>, pBontant@NordNet.Fr (Patrick BONTANT) writes:
> Could you help me?
> I search the schema for a cable cable to connect a AUX port to a modem
> It's the same than the CONSOLE port?

The console and the aux cable is the same, and comes in the zip-lock bag
with DCE and DTE flavor modular to DB25 and just now also a modular
to DB9 in DCE mode to connect to DTE/Terminal.

Beware of random wiring diagrams you may see. cisco switch from a 
staright through cable to a flipped modular cord and 'flipped' the adapters
suitably at that time. I.E. there are 2 rather different cisco cons/aux
cord kit styles floating around. 

There is detailed info on the philosophy of what was done as well as
wiring diagrams and the recomended mods to an older adapter to make it
behave like the newer ones (other that the cable flip issues) all on CIO.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads