Cisco Catalyst 6500 and VPLS ?

Thread View: comp.dcom.sys.cisco

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Mag Mon, 29 Dec 2008 09:06

#2150

Author: Mag
Date: Mon, 29 Dec 2008 09:06

53 lines
2719 bytes

Hi

anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
can support VPLS ?

because i have:


c6509-1#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
   Destination address: 172.20.10.1, VC ID: 135, VC status: down
     Tunnel label: not ready, LFIB entry present
     Output interface: unknown, imposed label stack {}
   Create time: 00:15:31, last status change time: 00:13:31
   Signaling protocol: LDP, peer 172.20.10.1:0 up
     MPLS VC labels: local 23, remote 24
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description:
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 0, send 0
     byte totals:   receive 0, send 0
     packet drops:  receive 0, send 0


c6506-2#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
   Destination address: 172.20.10.2, VC ID: 135, VC status: down
     Tunnel label: not ready, LFIB entry present
     Output interface: unknown, imposed label stack {}
   Create time: 00:18:41, last status change time: 00:15:26
   Signaling protocol: LDP, peer 172.20.10.2:0 up
     MPLS VC labels: local 24, remote 23
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description:
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 0, send 0
     byte totals:   receive 0, send 0
     packet drops:  receive 0, send 0

c6506-2#sh mpls l2transport vc

Local intf     Local circuit        Dest address    VC ID      Status
-------------  -------------------- --------------- ---------- ----------
VFI Internet   VFI                  172.20.10.2     135        DOWN




thanks for your help

Re: Cisco Catalyst 6500 and VPLS ?

#2151

Author: Steinar Haug
Date: Mon, 29 Dec 2008 12:07

6 lines
1530 bytes

> anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
> can support VPLS ?

No.

Steinar Haug, Nethelp consulting, sthaug@nethelp.no

Re: Cisco Catalyst 6500 and VPLS ?

#2152

Author: Lars Christensen
Date: Mon, 29 Dec 2008 12:45

15 lines
1258 bytes

Mag <mag@laposte.net> wrote in news:49589315$0$32711$426a74cc@news.free.fr:

> Hi
> 
> anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
> can support VPLS ?
> 

VPLS is not supported on the Catalyst 6500 series. You should upgrade to 
the 7600 series with enhanced corefacing interfaces, such as ES-cards or 
SIP-400/600 cards.

Regards
Lars Christensen
CCIE #20292

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads