Thread View: comp.dsp
5 messages
5 total messages
Started by the Old Rural Amateur
Mon, 07 Jan 1991 21:19
DSP boards for PCs
Author: the Old Rural Amateur
Date: Mon, 07 Jan 1991 21:19
Date: Mon, 07 Jan 1991 21:19
24 lines
1729 bytes
1729 bytes
I've been trying to ask in other places (like rec.ham-radio and some of our internal conferences) until I realized there's a DSP newsgroup... stupid me. I've been planning to try out some DSP stuff for ham radio / SWL applications for quite some time. I haven't done anything before - I do have some (?) theoretical background (a degree in EE) but have been a pure SW type for the past umpteen years... Anyway, my main question is, where (and for how much $$$) could I get a DSP board for a PC? For my specific purposes, sampling rates in the order of 10 kHz are sufficient (even lower for some applications), and 8 bit samples should be quite enough. What DSP chips are popular nowadays? (Mostly I hear of the 320 series). How does a typical board for a PC look like (how much memory, and how much should I be looking for)? As my theory has grown a bit rusty, I'd also appreciate pointers to good literature (textbooks for digital filter design, manufacturers application books etc.). The applications I have in mind involve detection of noisy FSK signals received by radio (data, FAX etc.). I could think of zillions of other applications in this area too...
Re: DSP boards for PCs
Author: Phil Lapsley
Date: Tue, 08 Jan 1991 20:05
Date: Tue, 08 Jan 1991 20:05
15 lines
1309 bytes
1309 bytes
jaervinen@bhajee.enet.dec.com asks about PC based DSP boards. Lots of companies make these. The one that I'm the most familiar with is the PC-56 from Ariel Corp. It's a DSP56000 (the Motorola DSP chip) with with 16K or 64K words of memory and optional analog I/O (single channel, 14 bit A/D and D/A, with variable sampling rate up to 20 kHz or so). The cost is between $500 and $700 (I think) depending on how much memory you get and whether you want the analog I/O chip. It's a pretty good starter board for somebody interested in learning about DSP and the 56k. Ariel's telephone number is (908) 249-2900. Like I said, though, there are lots of other companies that make DSP boards for the PC. If you're a digital hardware hacker, you could also build your own. Phil Lapsley phil@ucbarpa.Berkeley.EDU ...!ucbvax!phil
Re: DSP boards for PCs
Author: Mike Gingell
Date: Wed, 09 Jan 1991 14:37
Date: Wed, 09 Jan 1991 14:37
15 lines
1369 bytes
1369 bytes
Although not an internal DSP board for a PC there is a very interesting unit available from L L Grace. It looks and functions like an external modem to a PC but it contains a Motorola DSP56000 and a V40 coprocessor with 1 Meg of memory. It has programmable A/D and D/A with variable pre and post filters allowing sample rates up to 100 kHz. It also has three separate slelectable analog I/O channels and comes with algorithms built in for packet radio (300-9600 baud), CW (morse code), RTTY plus more to come in free upgrades (such as WEFAX, NAVTEX, AMTOR, SITOR, SSTV). They have an "open programming architecture" which means the user can add their own code. Base price is $595. I have no vested interested in the company except as a potential user. I have ordered one and will report on results when I get it going. Mike Gingell aurs01!aurw90!gingell@mcnc.org
Re: DSP boards for PCs (another question)
Author: Larry Granroth
Date: Wed, 09 Jan 1991 16:54
Date: Wed, 09 Jan 1991 16:54
15 lines
1264 bytes
1264 bytes
(I've just started following this group . . .) We have an application where we would like to digitize two simultaneous data streams with 8-bit resolution at 100kHz sampling rate, plus one or two auxiliary channels at 4-bit resolution at the same rate. This needs to be done continuously for about two hours at a time, so we need to output to a device that will accept that sustained data rate and have sufficient capacity. Current SCSI 8mm tape drives should do the job. Does anyone know of A/D hardware/software that we could use, preferably with an ISA PC? The board would need to be able to handle a direct SCSI connection to the 8mm storage device. Thanks for any pointers. -Larry Granroth@IowaSP.physics.UIowa.edu IOWASP::GRANROTH
Re: DSP boards for PCs
Author: Daniel Romanchik
Date: Thu, 10 Jan 1991 02:04
Date: Thu, 10 Jan 1991 02:04
20 lines
1523 bytes
1523 bytes
In article <59419@aurs01.UUCP> gingell@aurw90.UUCP (Mike Gingell) writes: >Although not an internal DSP board for a PC there is a very interesting >unit available from L L Grace. It looks and functions like an external >modem to a PC but it contains a Motorola DSP56000 and a V40 coprocessor >with 1 Meg of memory. It has programmable A/D and D/A with variable >pre and post filters allowing sample rates up to 100 kHz. It also has >three separate slelectable analog I/O channels and comes with algorithms >built in for packet radio (300-9600 baud), CW (morse code), RTTY plus >more to come in free upgrades (such as WEFAX, NAVTEX, AMTOR, SITOR, >SSTV). They have an "open programming architecture" which means the >user can add their own code. Base price is $595. Do you have an address and telephone number for this company? TNX, Dan KB6NU -- Dan Romanchik (danr@irie.ais.org, danr@m-net.ann-arbor.mi.us, 313-930-6564) "If it ain't broke, don't fix it." -- Ancient Engineering Maxim
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads