🚀 go-pugleaf

Hi folks,

After questions on availability of modules, below is a list of all modules
available via. anon ftp from both ftp.epcc.ed.ac.uk and swedishchef.lerc.nasa.gov

In addition, the /unsupported directory at swedishchef has all the stuff on the
CD distributed by SGI at SIGGRAPH - there is quite a bit of overlap. ( The
README file from the CD is included at the foot of this article)

Its probably fair to say that the FTP situation is in a bit of a state of flux,
but this will get cleaned up soon - sorry for any inconvenience.

(To those who know about all this already, apologies for wasting bandwidth...#:-)

	-Gordon...


         oOo Index to Modules available by FTP oOo
         =-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=--=-=-=-=

To grab any of the following modules, change to the relevant directory,
and `get' the compressed tar file that you find there. This will contain
all the information needed to execute the module. 

Where noted below, source code is included. The format for entries is:
======================================================================
MODULE DIRECTORY 
	Author(s) : <Author(s)>
	Module(s) : <Name> [Module|Scribe]
	Format    : [Source|Binary]
	Short Description :
======================================================================

----------------------------------------------------------------------
AnimFile 
	Author(s)	: Drew Whitehouse
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: AnimFile [Module]
	Format		: Source

	Description : 
		Generate sequences of filenames , using two strings and
		an integer.  Has 6 different styles. Generally used
		like :
		Timer---->AnimFile------>ReadImg
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
Audio_Modules  
	Author(s)	: SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: AudioIn [Module]
	Format		: SGI Binary (+ some source)

	Description :
		This module samples the audio input and  outputs  a
		uniform lattice  outputs  a  uniform lattice. The data
		is sampled in stereo mode with a 16-bit data range.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: AudioOut [Module]
	Format		: SGI Binary (+ some source)

	Description :
		This module plays a lattice on the audio output port.
		If the input  lattice  has  2  channels,  then  it
		plays in stereo.  Otherwise, it plays in mono.  The
		lattice stores the time in the   coordiantes,   so
		the  recoreded frequency  can  be determined.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ReadAIFF [Module]
	Format		: SGI Binary (+ some source)

	Description :
		This module reads AIFF formatted audio files and
		generates a uniform lattice.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: WriteAIFF [Module]
	Format		: SGI Binary (+ some source)

	Description :
		This  module  reads  a  uniform  lattice  and  writes
		AIFF formatted  audio  files.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
Axis 
	Author(s)	: Rob DeMillo
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Axis [Module]
	Format		: Source

	Description :
		"Axis" will annotate a geometric, rendered image that
		was constructed from an Explorer 3D Uniform Lattice.
		The user has control over the axes that are displayed,
		as well as textual information such as axis labels, tic
		labels and an image title. This module is meant to be
		used in conjunction with the "Render" module, since all
		of its output is in the geometric data set.

	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
Cartog
	Author(s) : Jim Phillips (Minnesota Supercomputer Institute)

	Description: 
		This directory holds a number of Explorer modules
		written by Jim Phillips which are useful in visualizing
		any data that has to do with the earth.

		WorldMap:  Reads the CIA map database and sends it
		along as a pyramid lattice.  We have also added a map
		for plate boundaries.  (Useful for Geology and
		Geophysics.)

		Projector:  Takes lattices and pyramids and warps them
		onto a number of map projections including mercator,
		Globe and many others.

		Bendbox:  Creates a bounding box of a size specified by
		the user.  Also displays tickmarks and ticklines.

		Elevation:  Reads an elevation file for the Earth and
		sends it along to be displaced and rendered.

		SimpleSphere:  Draws a sphere at a specified size.
		Used so that the backside of a map isn't seen when
		displayed on a sphere.

		All of the modules come with example maps which
		will also be distributed.

----------------------------------------------------------------------
CentreRot
	Author(s) : Dana Haukoos (SDSC)
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: CentreRot [Module]
	Format		: SGI Binary

	Description :

		CenterRot creates a transformation matrix that is
		useful  as an  input  to  the  optional  Transform
		lattice input of the Render  module.   It  provides
		capabilities   similar   to TransfomGen  except all
		inputs can be controled numerically.  It was created to
		overcome the problem of not being able  to save the
		transformation state of the Render module.

		The rotation follows the roll (X), pitch (Y),  and
		yaw  (Z) convention. By default, the center of rotation
		is the origin or lower left of the  lattice.  The
		CtrX,  CtrY,  and  CtrZ inputs  allow  the  user  to
		choose another point to rotate about (for example, the
		center of the lattice).
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ChannelAnimate
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ChannelAnimate [Module]
	Format		: SGI Binary

	Description :
		ChannelAnimate  selects  a  single  channel  from  a
		vector lattice  and  outputs  it  as a scalar lattice.
		If desired, ChannelAnimate will walk sequentially down
		each  channel  in the  input  lattice  and  output
		each  as a separate scalar lattice in an animation
		fasion.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ChannelMerge
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ChannelMerge [Module]
	Format		: SGI Binary 

	Description :
		ChannelMerge will take data from up to five scalar or
		vector lattices  and  merge the data portions of each
		into a single vector  lattice
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ChannelSelect
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ChannelSelect [Module]
	Format		: SGI Binary 

	Description :
		This module takes a lattice with  many  data
		variables  and splits  out one of the data variables.
		This module is useful extracting a single data variable
		to be used in a downstream module.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
ColorXform
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ColorXform [LatFunction]
	Format		: Source

	Description :
		Creates a gray-scale image from an RGB image.  The
		intensity is the linear combination of the R, G, and B
		channels scaled by the transform scalars. Before
		output,  the  intensity  is scaled to [0...255].  Can
		be used to replace the LatFunction module in the
		color-xform sample map.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
Datascribe_Examples
	Author(s) : SGI
----------------------------------------------------------------------
dsChannelSelect
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: dsChannelSelect [Scribe]
	Format		: Source

	Description :
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
Heat_flux
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: HeatFlux [LatFunction]
	Format		: Source

	Description :
		Simulates heat flow  by  using  a  forward  difference
		time integration  with  a  standard five-point
		Laplacian stencil.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
ImageVision_example
	Author(s) : SGI
----------------------------------------------------------------------
ImportImage
	Author(s) : Drew Whitehouse
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ImportImage [Module]
	Format		: SGI Binary (+some source)

	Description :
		Imports images of various formats and outputs them as
		an explorer image lattice.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
IsosurfaceLat2
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: IsosurfaceLat2 [Module]
	Format		: SGI Binary 

	Description :
		Extended/fixed version of original
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
IsosurfacePyr2
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: IsosurfacePyr2 [Module]
	Format		: SGI Binary 

	Description :
		Extended/fixed version of original
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
LatFunction2
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Latfunction2 [Module]
	Format		: SGI Binary 

	Description :
		Extended/fixed version of original
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
LatGplot
	Author(s) : Robert van Liere
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: LatGplot [Module]
	Format		: Source

	Description :
		LatGplot is an Explorer module that acts as a wrapper
		around the GNUPLOT interpreter.

		LatGplot can optionally be driven by a gnuplot script.
		If the script is not provided, LatGplot will use its
		default options to draw a plot
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
LatToGeom2
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: LatToGeom2 [Module]
	Format		: SGI Binary 

	Description :
		Extended/fixed version of original
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
LatToSurf
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: LatToSurf [Module]
	Format		: SGI Binary 

	Description :
		This module generates a lit, solid surface from a 2D
		grid.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
MopacView
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: MopacView [Module]
	Format		: SGI Binary 

	Description :
		This module reads  the  MOPAC  plot  file  and
		generates  a lattice.  It  is  fundamentally  and
		implementation  of the density program.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
PrimTypeLF
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: PrimTypeLF [LatFunction]
	Format		: Source

	Description :
		Sample  LatFunction  that  converts  coordinate types
		For example, it can convert uniform to curvilinear
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
PseudocolorImg
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: PseudocolorImg [Module]
	Format		: SGI Binary 

	Description :
		This module takes a  lattice  with  one  data
		variable  and generates a lattice with RGB stored in
		the data section. The colormap is used as a lookup
		table for these colors.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
Read3DCoords
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Read3DCoords [Scribe]
	Format		: Source

	Description :
		The purpose of this modules is to provide an example of
		how to read in a set of 3D coordinates as points for
		scatter plotting purposes.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
ReadImages
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ReadImages [Module]
	Format		: SGI Binary (+ some source)

	Description :

	This module will read a series of SGI RGB images and compose a
	3D byte lattice out of them.

----------------------------------------------------------------------
ReadMovieBYU
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: readMovieBYU [Module]
	Format		: SGI Binary 

	Description :
		This module read  in  Movie.BYU  formatted data
		files  and generates a FEA pyramid.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
----------------------------------------------------------------------
ReadMultiPlot3D
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ReadMultiPlot3D [Scribe]
	Format		: Source

	Description :
		ReadMultiPlot3D will read a multi-blocked  Plot3D
		file  and output  each block as a separate lattices
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
Readsocklat
	Author(s) : John Krysynak (NASA Ames Research Centre)
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Readsocklat [Module]
	Format		: Source

	Description :
		The Readsocklat module reads floating point vectors
		from a socket into a lattice.  The socket connection is
		a TCP/IP coonection based socket.  Currently, the
		Explorer module establishes a server socket.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ReadXplor
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ReadXplor [Module]
	Format		: SGI Binary

	Description :
		This module reads X-PLOR format electron  density
		maps  and generates a volume lattice.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
RenderRemote
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: RenderRemote [Module]
	Format		: SGI Binary

	Description :
		This modules is  a  complete  implementaion  of  the
		Render module   for   a  remote  display.  This  user
		chooses  the equivalent of the DISPLAY variable and
		that  is  the  screen for  the  Render  window
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ScaleDelays
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ScaleDelays [Module]
	Format		: SGI Binary
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
SelectChan
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: SelectChan [Module]
	Format		: SGI Binary
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
SwitchGeom
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: SwitchGeom [Module]
	Format		: SGI Binary

	Description :
		SwitchGeom allows the user  to  block  or  process
		geometry datatypes. It acts as a valve for passing the
		geometry
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
Streakline
	Author(s) : Gary Griffin (SGI)
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Streakline [Module]
	Format		: SGI Binary

	Description :
		This module calculates a streakline through a velocity
		field.  It stops when either the new velocity is 0, or
		when the streak intersects the bounds of the velocity
		field.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
TestIL
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	Module          : TestIL [Module] Format          : Source

	Description :
		An example of using Explorer and ImageVision
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
ToCoord
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: ToCoord [LatFunction]
	Format		: Source

	Description :
		Sample LatFunction module that  converts  the  lattice
		data type. For example, byte to long
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
TriangulateDelauney
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: TriangulateDelauney [Module]
	Format		: SGI Binary

	Description :
		Generates a Delauney triangulation from 2 dimensional
		data.  The output is a pyramid format.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
Tubes
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Tubes [Module]
	Format		: SGI Binary

	Description :
		This module generates a  set  of  cylinders  from  a
		vector field.   The  length  of the cylinder is
		proportional to the magnitude of the vector field, and
		its  direction  indicates the relative magnitude of
		each component.  The cylinders may also be colored
		based upon the information in  the  optional scalar
		field and colormap inputs.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
Vectors
	Author(s) : SGI
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: Vectors [Module]
	Format		: SGI Binary

	Description :
		This module generates a set of arrows from a  vector
		field.  The  length of the arrow is proportional to the
		magnitude of the vector field, and its direction
		indicates  the  relative magnitude of each component.
		The arrows may also be colored based upon the
		information in the optional scalar field  and colormap
		inputs.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------
WorkBench
	Author(s) : Gordon Cameron (EPCC)
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~		
	Module		: WorkBench [Module]
	Format		: Source

	Description :
		This module is designed to supply a single number which
		can be fed into other modules, such as OrthoSlice as
		the slice number. It can usefully used to allow fine
		control over numeric parameters - for example, a number
		can be single stepped by an EXACT set step in either
		direction.  This is useful for stepping through values
		in an orderly fashion, as the slider widget at present
		doesn't allow single precise-stepping.  Simply wire the
		Current Value outout parameter into any other parameter
		that you want to control.
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----------------------------------------------------------------------


=======

SGI CD - available from SGI directly, or via FTP from swedishchef.lerc.nasa.gov
*ONLY*
~~~~~~~~~~~~~~~~~~~
This directory (/unsupported) contains Explorer files that are unsupported. 
The basic structure is the same as EXPLORERHOME. A summary of the directories is :

data
                lattice                 data files for the maps provided
                misc                    data files for specific test maps
                mopac                   Input files for MopacView
                movieBYU                Input files for ReadMovieBYU
                scribe                  Data files for dscribe examples

doc                                     PostScript files for the documentation
                modulewriters
                usersguide
                modules                 PostScript form of manual pages

latfuncs                                Input latfunc files for maps provided
man                                     manual pages for modules
maps                                    Test example map for all the new modulesmodules                                 New modules
scribe                                  Example dscribe modules
src                                     Source to some of the modules
                ChannelAnimate
                ChannelMerge
                ChannelSelect
                MopacVIew
                PseudocolorImg
                ReadMovieBYU
                ReadXplor
                TestIL
                Vectors
                audio


In addition, we are providing a group of computational fluid dynamics modules
in the directory 'cfd'. These modules are very specific for that market.

There are a few modules that are enhanced versions of existing modules.
All of these modules are appended with the number 2. The enhancements are :

IsosurfaceLat2  Added slider for which variable to color vs surface
IsosurfacePyr2  Added slider for which variable to color vs surface
LatFunction2            Fixed initialization bug
LatToGeom2              Added support for transparency



The following is a list of maps and the modules that they exercise.

        Map             Modules

        aiff            ReadAIFF
                        WriteAiff

        audio           AudioIn
                        AudioOut

        channel         ChannelAnimate
                        ChannelMerge

        colorXform      ColorXform
                        LatFunction2

        heatFlux        Heat_flux
                        LatFunction2
                        LatToGeom2

        isosurfacelat   IsosurfaceLat2
                        RenderRemote
                        SwitchGeom

        isosurfacepyr   IsosurfacePyr2

        mopac           MopacView
        movie           ReadMovieBYU

        pseudoColor     ChannelSelect
                        PseudocolorImg

        read3D          Read3DCoords

        testIL          TestIL

        tornado         Tubes


        triangulate     TriangulateDelauney

        xplor           ReadXPLOR

        cfdExplorer     ReadMultiPlot3D
                        LatToSurf
                        Vectors








-- 
e|p Gordon Cameron                      |     Phone:+44 31 650 5024(Rm. 2259)
c|c Edinburgh Parallel Computing Centre |     Email: gordonc@epcc.ed.ac.uk
    oOo The University of Edinburgh oOo |    'So far so good, so now so what'