🚀 go-pugleaf

In article <ERICJ.92Sep9140157@calcutta.cfsat.Honeywell.COM>, ericj@hwcae.Honeywell.COM (Eric Jacobsen) writes...
>   In article <1992Sep9.142630.9560@engage.pko.dec.com>, hampton@ecadsr.enet.dec.com (Jonathan D. Hampton) writes:
>   > 
>   > I'm using Cadence's VERILOG-XL tool and I was wondering if anyone
>   > can tell me how to display simulation results as waveforms on the screen
>   > or in a file.  The tutorial mentions a graphical output facility, but
>   > the manuals do not.
>   > 
>Assuming your system has all the appropriate hooks, all you need in your
>code is:
> 
>	$gr_waves( "label", signal,
>		   "label2", signal2,
>		   "bus", bus_name,
>		   "more", stuff );
> 
>Up to 21 labels (I think) can be displayed in one group. You can define
>more than one group and switch between them.
> 
>Put the $gr_waves(...); in your .vt file.
> 
>Hope this helps...
> 
>--
>*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
>* Eric Jacobsen        Honeywell Inc.                           *
>|     1-602-436-3941   Commercial Flight Systems, Air Transport |
>* HVN       436-3941   US Mail: P.O. Box 21111, MS 2Q34C1       *
>| FAX 1-602-436-1310   Phoenix AZ 85036-1111                    |
>* INet: ericj@hwcae.honeywell.com                               *
>| UUCP: uunet!hwcae.honeywell.com!ericj@uunet.uu.net            |
>* The opinions expressed are my own and therefore better        *
>| thought out than my employer's.                               |
>*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
> 

Thanks to all who replied here and by mail!  I found the manual.

Hamp


-----

Jonathan "Hamp" Hampton 	  hampton@ecadsr.enet.dec.com


	"Zipperphobia?  *BUTTON* your fly!"

-----