Article View: comp.os.linux.hardware
Article #28Re: USR Sportster PnP + Linux: Does it work?
From: Paul S Secinaro
Date: Thu, 22 Feb 1996 14:42
Date: Thu, 22 Feb 1996 14:42
22 lines
1267 bytes
1267 bytes
buddyt@earthlink.net (George S. Thompson) writes: >Hey Paul > I use a the U.S. Robotics (Sportster) 28800 and I run it under Linux >and Windows 95 with no problem. It fits all my needs. Before I >bought it I did some reading about it and found everything to be true. >I recommend it. Just to follow up my own post - I finally did get the Sportster PnP, and yes, it does work fine. It turns out that it only goes into PnP mode if you pull out all the IRQ and COM port select jumpers. If you use the jumpers, the modem will be hardwired to those settings, just as you would expect from a non-PnP Sportster. -Paul -- Paul Secinaro (pss1@christa.unh.edu) Synthetic Vision and Pattern Analysis Laboratory UNH Dept. of Electrical and Computer Engineering
Technical Details
Message-ID:
<4ghvc5$ulk@mozz.unh.edu>Path:
arc1-ca.pugleaf.net!hopper.unh.edu!pss1References:
<4ejbbt$sah@mozz.unh.edu> <310C7B0D.4DEC85F1@mustang.uwo.ca> <4g0rod$jbv@bolivia.it.earthlink.net>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!hopper.unh.edu!pss1 From: pss1@hopper.unh.edu (Paul S Secinaro) Newsgroups: comp.os.linux.hardware,comp.os.linux.networking,comp.dcom.modems Subject: Re: USR Sportster PnP + Linux: Does it work? Date: 22 Feb 1996 14:42:13 GMT Organization: University of New Hampshire - Durham, NH Message-ID: <4ghvc5$ulk@mozz.unh.edu> References: <4ejbbt$sah@mozz.unh.edu> <310C7B0D.4DEC85F1@mustang.uwo.ca> <4g0rod$jbv@bolivia.it.earthlink.net> NNTP-Posting-Host: hopper.unh.edu