🚀 go-pugleaf

Kurniadi Asrigo <q8n25@unb.ca> wrote:
>(...)
>But after the boot finish and I ran dmesg, it seems the soundcard was
>initialized and working right, at least to me. This is part of the
>dmesg:
>
>Sound initialization started
>Sound initialization complete

Until it's working fine, I can see no problem ;-)

>and at the end it said:
>
>sb_card: I/O, IRQ, and DMA are mandatory
><SoundBlaster EMU8000 (RAM512k)>

Check out the /etc/conf.modules. There should be a line in there
looking something like this 9this is of course just an example):

option sb io=0x220 irq=5 dma=1 dma16=5

I think that there is something missing in that line. Just when you type
manually "insmod sb", but without the appropriate parameters, you'll get the
same error message.

>The complete dmesg is attached at end of this e-mail.

"Nice hardware you have!" said master Yoda ;-)

>If I try insmod, I will get this message:
>
>sb.o: unresolved symbol unload_uart401_Rsmp_ecfdd9c9
>sb.o: unresolved symbol attach_uart401_Rsmp_45af1327
>sb.o: unresolved symbol uart401intr_Rsmp_6391d066
>sb.o: unresolved symbol probe_uart401_Rsmp_6467f99b
> 
>in /lib/modules/2.2.13/misc I have these files:
>sb.o  awe_wave.o  es1371.o  parport_probe.0 uart401.o
>uart6850.o
>
>Does anybody has any idea about the problem? Or any suggestion that I
>have to try?

S*** happens ;-) It doesn't matter, really. That kind of errors tend to appear
sometimes, but they usually are just warnings and have no influence on
how the modules work. If your soundcard work it rather means that everything is
OK.

You have been watching: "Some lame hints from:"
--
Calder a.k.a. Venex

Best wishes :-)