🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

🏠 Home 📰 News 🗂️ Usenet Search 🔑 Login 📝 Register
Thread View: comp.os.linux.misc
3 messages
[T] Back to Threads [V] Tree View [G] Group Articles
3 total messages Started by Matthias Schreiber Thu, 30 May 1996 00:00
Help: 1.3 Kernels won't work with my computer
#585
Author: Matthias Schreiber
Date: Thu, 30 May 1996 00:00
351 lines
11128 bytes 

Hi!
All my tries mto use one of the newer kernels failed. I tried already:
1.3.57, 1.3.59, 1.3.92, 1.3.93, 1.3.95, 1.3.97, pre2.0.7
but everytime the same: after a few minutes (up to 15 min) the kernel
crashes... (the correct crash message I didn't wrote down, because it
was too long and I would have to type it into the computer again..., but
I include some config files and other stuff and a crash message which is
an example for all the varieties of crash messages)
When starting the computer there appears everytime a line like this (see
dmesg included):
  fcntl_setlk() called by process 154 (lpd) with broken flock() emulation
with lpd, cron and sendmail...


My system:	486 DX-4 100
		ASUS SP-3G PCI Board
		NCR Controller
		16 MB RAM
		SMC Elite Combo Netcard
		(the rest is visible when you read the dmesg I incl.)
config File of pre0.7 is also included
Please help me. I would be very thankful. Perhaps something wrong in the
bios? Or something wrong in compiling the kernel?

cu,
		MATZE


# dmesg: #
##########
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fc310
pcibios_init : BIOS32 Service Directory entry at 0xfc740
pcibios_init : PCI BIOS revision 2.00 entry at 0xfc770
Probing PCI hardware.
Calibrating delay loop.. ok - 49.87 BogoMIPS
Memory: 14592k/16384k available (784k kernel code, 384k reserved, 624k data)
This processor honours the WP bit even when in supervisor mode. Good.
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.12 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized^M
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 1.99.7 (root@graf_zahl) (gcc version 2.7.0) #1-pre-2.0 Sat May 25
00:37:35 MET DST 1996
Serial driver version 4.12 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
tty03 at 0x02e8 (irq = 3) is a 16550A
lp1 at 0x0378, (polling)
ftape-2.08 960314 for Linux 1.3.70
Floppy drive(s): fd0 is 1.44M
Started kswapd v 1.4.2.2
FDC 0 is a National Semiconductor PC87306
scsi-ncr53c7,8xx : at PCI bus 0, device 1,  function 0
scsi-ncr53c7,8xx : NCR53c810 at memory 0xfbfff000, io 0xe800, irq 10
scsi0 : burst length 8
scsi0 : reset ccf to 3 from 0
scsi0 : NCR code relocated to 0x14600 (virt 0x00014600)
scsi0 : test 1 started
scsi0 : NCR53c{7,8}xx (rel 17)
scsi : 1 host.
scsi0 : target 0 accepting asynchronous SCSI
scsi0 : setting target 0 to asynchronous SCSI
  Vendor: SEAGATE   Model: ST11900N          Rev: 8010
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi0 : target 6 accepting asynchronous SCSI
scsi0 : setting target 6 to asynchronous SCSI
  Vendor: SONY      Model: CD-ROM CDU-561    Rev: 1.7X
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 3310215 [1616 MB] [1.6 GB]
smc-ultra.c:v1.99 4/17/96 Donald Becker (becker@cesdis.gsfc.nasa.gov)
eth0: SMC Ultra at 0x280, 00 00 C0 86 C8 AA, IRQ 11 memory 0xca000-0xcdfff.
Partition check:
 sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 16376k swap-space
Max size:271466   Log zone size:2048
First datazone:26   Root inode number 53248
fcntl_setlk() called by process 67 (crond) with broken flock() emulation
fcntl_setlk() called by process 124 (sendmail) with broken flock() emulation
fcntl_setlk() called by process 144 (lpd) with broken flock() emulation
fcntl_setlk() called by process 152 (lpd) with broken flock() emulation
fcntl_setlk() called by process 154 (lpd) with broken flock() emulation



# crash message #
#################
EFLAGS: 00010206
eax: 000002e0   ebx: 00150560   ecx: 00000100   edx: 001dfea4
esi: 00000000   edi: 0020fc24   ebp: 000000b8   esp: 001dea20
ds: 0018   es: 0018   fs: 002b   gs: 0018   ss: 0018
Process swapper (pid: 0, process nr: 0, stackpage=001dcb34)
Stack: 00150560 00014820 00000001 001dea6c 0020fc24 00014820 00000246 00150580
       001e2868 00150560 001e2868 00000001 001dea6c 00014820 001113c0 00000000
       00000001 ffffffff 00000001 00207fc8 001175eb 001dea88 001deb14 00000000
Call Trace: [<00150560>] [<00150580>] [<00150560>] [<001113c0>] [<001175eb>] [<0
010a50b>] [<001095cf>]
       [<00109633>] [<0010a582>] [<00109370>] [<001c0018>] [<001091d7>]
Code: 8b 31 fa 83 79 10 00 75 2b 8b 41 1c 05 30 75 00 00 39 44 24
Aiee, killing interrupt handler
kfree of non-kmalloced memory: 001deb74, next= 00000000, order=0
kfree of non-kmalloced memory: 001deb64, next= 00000000, order=0
kfree of non-kmalloced memory: 001def98, next= 00000000, order=0
idle task may not sleep
idle task may not sleep
idle task may not sleep
idle task may not sleep
idle task may not sleep



# .config #
###########
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KERNELD is not set

#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M686 is not set

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_IDE is not set

#
# Please see drivers/block/README.ide for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_ONLY is not set

#
# Additional Block Devices
#
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set

#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
# CONFIG_IP_ALWAYS_DEFRAG is not set
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
CONFIG_IP_ALIAS=y
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
# CONFIG_INET_RARP is not set
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y

#
#  
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_NETLINK is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CDrom)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set

#
# SCSI low-level drivers
#
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_NCR53C7xx=y
# CONFIG_SCSI_NCR53C7xx_sync is not set
# CONFIG_SCSI_NCR53C7xx_FAST is not set
# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_AM53C974 is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=y
# CONFIG_SMC9194 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_ARCNET is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Filesystems
#
CONFIG_QUOTA=y
# CONFIG_LOCK_MANDATORY is not set
CONFIG_MINIX_FS=m
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
CONFIG_SMB_FS=y
CONFIG_ISO9660_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set

#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=y
# CONFIG_BUSMOUSE is not set
# CONFIG_PSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
CONFIG_FTAPE=y

#
# Set IObase/IRQ/DMA for ftape in ./drivers/char/ftape/Makefile
#
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set

-- 
                                                      \\\
                                                    ( o o )
----------------------------------------------o00o----()----o00o-----
| Matthias Schreiber                                                |
| e-Mail: schreibe@informatik.uni-muenchen.de   .oooO               |
| WWW:    http://www.lrz-muenchen.de/a/a2822bi  (   )   Oooo.       |
-------------------------------------------------\ (----(   )--------
                                                  \_)    ) /
                                                        (_/
Re: Help: 1.3 Kernels won't work with my computer
#586
Author: Robert Hart
Date: Thu, 30 May 1996 00:00
28 lines
1857 bytes 
Matthias Schreiber (schreibe@informatik.uni-muenchen.de) wrote:

: Hi!
: All my tries mto use one of the newer kernels failed. I tried already:
: 1.3.57, 1.3.59, 1.3.92, 1.3.93, 1.3.95, 1.3.97, pre2.0.7
: but everytime the same: after a few minutes (up to 15 min) the kernel
: crashes... (the correct crash message I didn't wrote down, because it
: was too long and I would have to type it into the computer again..., but
: I include some config files and other stuff and a crash message which is
: an example for all the varieties of crash messages)
: When starting the computer there appears everytime a line like this (see
: dmesg included):
:   fcntl_setlk() called by process 154 (lpd) with broken flock() emulation
: with lpd, cron and sendmail...

Well - that at least is relatively easy to solve - you need to install
the libc 5.2.18.

I suggest you investigate /usr/src/linux/Documentation/Changes and make
sure that the various versions of other required software meets the
requirements laid out here.

--

Robert Hart                                  hartr@hedland.edu.au
Voice: +61 (0)91 72 0429                     Fax:   +61 (0)91 72 3560
Hedland College, PMB 1, South Hedland WA 6722 Australia
Re: Help: 1.3 Kernels won't work with my computer
#587
Author: robob
Date: Sat, 01 Jun 1996 00:00
19 lines
1048 bytes 
In article <4ojv7s$a43@arcadia.informatik.uni-muenchen.de>, schreibe@informatik.uni-muenchen.de (Matthias Schreiber) writes:

|> tty00 at 0x03f8 (irq = 4) is a 16550A
|> tty01 at 0x02f8 (irq = 3) is a 16550A
|> tty03 at 0x02e8 (irq = 3) is a 16550A

Shows two com ports on the same interrupt.

|> Aiee, killing interrupt handler

Shows interrupt handler to be having trouble?


Action Plan:

Try fixing you irq conflict.

Robert A. Ober:)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads