dip-3.3.7n and Motorola Power 28.8

Article View: comp.os.linux.networking

Article #8

Back to comp.os.linux.networking Previous Next

From: Daniel C. Gnanaprakasam
Date: Fri, 27 Oct 1995 17:41

20 lines
1240 bytes

I am using dip-3.3.7n, and having problems talking to my Motorola
Power 28.8 modem.  dip seems to think that the modem is busy, 
the "dial phone-no" command always returns status 3 which is the code 
for busy line. The "send ATDTphone-no\r" returns immediately with 
status 0 and nothing happens.  I can dial out using either
kermit or seyon.  In the case of seyon, I had to set the resource
"ignoremodemDCD: on" in my .Xdefaults before it started working.  
Is there a command for doing the same thing in dip?  I am using
Linux 1.2.8.

Any help is greatly appreciated.
Thanks,
daniel

-- 
Daniel C. Gnanaprakasam           Phone: (609) 386-5995  Ext: 127
Matsushita Applied Research Labs.   Fax: (609) 386-4999
95D Conneticut Drive 	         e-mail: daniel@marl.research.panasonic.com 
Burlington, NJ 08016

Technical Details

Message-ID: <1995Oct27.174100.4855@MITL.Research.Panasonic.COM>

Path: arc1-ca.pugleaf.net!panasonic.com!daniel

Show Full Headers

Complete Article Headers

Newsgroups: comp.os.linux.networking,comp.os.linux.setup,comp.dcom.modems
Path: arc1-ca.pugleaf.net!panasonic.com!daniel
From: daniel@marl.research.panasonic.com (Daniel C. Gnanaprakasam)
Subject: dip-3.3.7n and Motorola Power 28.8
Message-ID: <1995Oct27.174100.4855@MITL.Research.Panasonic.COM>
Sender: news@MITL.Research.Panasonic.COM
Organization: Matsushita Applied Research Labs.
Date: Fri, 27 Oct 1995 17:41:00 GMT