dip-3.3.7n and Motorola Power 28.8

Thread View: comp.os.linux.networking

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Daniel C. Gnanaprakasam Fri, 27 Oct 1995 17:41

Author: Daniel C. Gnanaprakasam
Date: Fri, 27 Oct 1995 17:41

20 lines
1240 bytes

I am using dip-3.3.7n, and having problems talking to my Motorola
Power 28.8 modem.  dip seems to think that the modem is busy, 
the "dial phone-no" command always returns status 3 which is the code 
for busy line. The "send ATDTphone-no\r" returns immediately with 
status 0 and nothing happens.  I can dial out using either
kermit or seyon.  In the case of seyon, I had to set the resource
"ignoremodemDCD: on" in my .Xdefaults before it started working.  
Is there a command for doing the same thing in dip?  I am using
Linux 1.2.8.

Any help is greatly appreciated.
Thanks,
daniel

-- 
Daniel C. Gnanaprakasam           Phone: (609) 386-5995  Ext: 127
Matsushita Applied Research Labs.   Fax: (609) 386-4999
95D Conneticut Drive 	         e-mail: daniel@marl.research.panasonic.com 
Burlington, NJ 08016

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads