🚀 go-pugleaf

Matt Harrell schreef:

> LightningBit wrote:
> >
> > I installed Redhat 5.0 (as a newbie) some days ago (no problems
> there).
> >
> > after fooling around a bit, I decided to make a fresh installation,
> in
> > EXACTLY THE SAME WAY like I did before :
> >
> > the installation-set is on my 2nd harddrive (400 MB), (/dev/hdb1)
> > I boot with the 2 installationdisk (boot-disk + supplemental)
> > I create the necessar partitions on my first harddisk (1 GB) with
> Disk Druid
> > (/dev/hda..)
> > it formats the swap-partition without any problems,
> > when asked, I give the path where the redhat-distribution is located
>
> > (/redhat)
> > and when he starts scanning the available packages, after a while he
> gives
> > messages (corrupting the installation display) like :
> > "install exited abnormally -- recieved signal 11"
> > "sending termination signals ... done"
> > "sending kill signals ... done"
> > "unmounting filesystems ..."
> >
> > and so on ...
> >
> > any comments or a solution for my problem ??
> >
> > thx,
> >
> > Lightningbit
>
> Check out Red Hat's "Product Errata" in their support section of their
>
> web site.  It gives a way around this problem for those of us who
> experienced it.
>
> --
> --
> ----========++++++++++**********************++++++++++========-------
>                          P120+ Cyrix 6x86, Win95 & RedHat Linux w/ CDE
>
> Matt Harrell             Adaptec AHA2940 Fast SCSI-2 controller
> mharrell@voyager.net     64MB RAM, 2.1GB EIDE and 1.28GB SCSI-2 disks
> my.voyager.net/mharrell  Sound Blaster 16 PnP, 4X CD-ROM, SyQuest
> SyJet
>                          Matrox Millenium II w/4MB WRAM, APC UPS-Pro
> 280
> ---
> ---========++++++++++**********************++++++++++========-------
>
> This article was posted from <A HREF="http://www.slurp.net/">Slurp
> Net</A>.

This won't help you very much, but I had exactly the same problem while
installing RH 4.2 (I'm not a newbie:-))) It seems to have something to
do woth with corrupt file system or hard disk with bad sectors

I'd like a solution too :-)

grtx Rien Broekstra