🚀 go-pugleaf

Maybe I'm in the wrong group, but I hope somebody can help.

I want to setup mgetty on a SuSE 7.2 machine. The faxmodem is installed 
and configured to run at ttyS3. It is a 1414VQH and is capable to 
handle class 1, class 2, and class 2.0 (that's what the manual says).

This is the mgetty.config file:

# mgetty configuration file
# set the local fax station id
fax-id 49 xxxx xxxxxxx
# the xx's contain the actial number

# access the modem(s) with 38400 bps /19200 bps
speed 19200

#  use these options to make the /dev/tty-device owned by "uucp.uucp" 
#  and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!*
port-owner root
port-group uucp
port-mode 0664

#  use these options to make incoming faxes owned by "root.uucp" 
#  and mode "rw-r-----" (0640). *LEADING ZERO NEEDED!*
fax-owner root
fax-group uucp
fax-mode 0640


# ----- port specific section -----
# 
# Here you can put things that are valid only for one line, not the 
others
#

# Perl modem an COM4 (ttyS3)
port ttyS3
modem-type auto
debug 9

--- end mgetty.config---

When I dial the number which should be answered by the modem, I can 
hear the typical sound, i.e. I assume the connection is ok. However, I 
cannot send a fax to this number. The modem continues to send it's 
sound, but does not accept the connection.

This is the log file:

--
02/28 17:24:00 yS3  mgetty: experimental test release 1.1.22-Aug17
02/28 17:24:00 yS3  check for lockfiles
02/28 17:24:00 yS3   checklock: stat failed, no file
02/28 17:24:00 yS3  locking the line
02/28 17:24:00 yS3   makelock(ttyS3) called
02/28 17:24:00 yS3   do_makelock: lock='/var/lock/LCK..ttyS3'
02/28 17:24:00 yS3   lock made
02/28 17:24:00 yS3   tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
02/28 17:24:00 yS3  WARNING: DCD line still active, check modem 
settings (AT&Dx)
02/28 17:24:00 yS3  lowering DTR to reset Modem
02/28 17:24:01 yS3   tss: set speed to 38400 (017)
02/28 17:24:01 yS3   tio_set_flow_control( HARD )
02/28 17:24:01 yS3   waiting for line to clear (VTIME), read: 
02/28 17:24:01 yS3  send: \dATQ0V1H0[0d]
02/28 17:24:02 yS3  waiting for ``OK''
02/28 17:24:02 yS3   got: ATQ0V1H0[0d]
02/28 17:24:02 yS3    CND: ATQ0V1H0[0d][0a]OK ** found **
02/28 17:24:02 yS3  send: ATS0=0Q0&D3&C1[0d]
02/28 17:24:02 yS3  waiting for ``OK''
02/28 17:24:02 yS3   got: [0d]
02/28 17:24:02 yS3    CND: OK[0a]ATS0=0Q0&D3&C1[0d]
02/28 17:24:02 yS3    CND: ATS0=0Q0&D3&C1[0d][0a]OK ** found **
02/28 17:24:02 yS3  mdm_send: 'ATI'
02/28 17:24:02 yS3    got:[0d][0a]ATI[0d]
02/28 17:24:03 yS3    got:[0d][0a]248[0d]
02/28 17:24:03 yS3   mdm_gis: string 1: '248'
02/28 17:24:03 yS3    got:[0a][0d][0a]OK[0d]
02/28 17:24:03 yS3   mdm_identify: string '248'
02/28 17:24:03 yS3  unknown numerical modem id 248
02/28 17:24:03 yS3  mdm_send: 'AT+FCLASS=2.0'
02/28 17:24:03 yS3    got:[0a]AT+FCLASS=2.0[0d]
02/28 17:24:03 yS3   mdm_command: string 'AT+FCLASS=2.0'
02/28 17:24:03 yS3    got:[0d][0a]OK[0d]
02/28 17:24:04 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:04 yS3  mdm_send: 'AT+FAA=1;+FCR=1'
02/28 17:24:04 yS3    got:[0a]AT+FAA=1;+FCR=1[0d]
02/28 17:24:04 yS3   mdm_command: string 'AT+FAA=1;+FCR=1'
02/28 17:24:04 yS3    got:[0d][0a]OK[0d]
02/28 17:24:04 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:04 yS3  mdm_send: 'AT+FBO=1'
02/28 17:24:04 yS3    got:[0a]AT+FBO=1[0d]
02/28 17:24:04 yS3   mdm_command: string 'AT+FBO=1'
02/28 17:24:04 yS3    got:[0d][0a]OK[0d]
02/28 17:24:05 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:05 yS3  mdm_send: 'AT+FNR=1,1,1,0'
02/28 17:24:05 yS3    got:[0a]AT+FNR=1,1,1,0[0d]
02/28 17:24:05 yS3   mdm_command: string 'AT+FNR=1,1,1,0'
02/28 17:24:05 yS3    got:[0d][0a]OK[0d]
02/28 17:24:05 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:05 yS3  mdm_send: 'AT+FLI="49 xxxx xxxxxxx"'
02/28 17:24:05 yS3    got:[0a]AT+FLI="49 xxxx xxxxxxx"[0d]
02/28 17:24:05 yS3   mdm_command: string 'AT+FLI="49 xxxx xxxxxxx"'
02/28 17:24:05 yS3    got:[0d][0a]OK[0d]
02/28 17:24:05 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:06 yS3  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
02/28 17:24:06 yS3    got:[0a]AT+FCC=1,5,0,2,0,0,0,0[0d]
02/28 17:24:06 yS3   mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
02/28 17:24:06 yS3    got:[0d][0a]OK[0d]
02/28 17:24:06 yS3   mdm_command: string 'OK' -> OK
02/28 17:24:06 yS3   waiting for line to clear (VTIME), read: 
02/28 17:24:06 yS3   removing lock file
02/28 17:24:06 yS3  waiting...

The x's again stand for the true phone number. If I understand the log 
correctly, the modem responds with class 2.0 and I would have expected 
that it runs ok. Any idea what I need to change or where to find more 
information?

Thanks
Werner