File corruption problem

Thread View: comp.os.netware.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Limno-Tech Inc. Wed, 20 Sep 1995 00:00

#579

Author: Limno-Tech Inc.
Date: Wed, 20 Sep 1995 00:00

17 lines
1368 bytes

Ok. A few months ago we had a file corruption problem with our 4.1 server
and a seagate 4G drive. We finally figured out that over 1.g support 
should be disabled on the adaptec SCSI controller.. everything worked after
we reformatted (low-level) the disks. 

However.. now.. the files I restored from tape. some of them evidently were
corrupted still and were written in a corrupted format. If someone tries to 
access these files the server utilization jumps from 5-10% to 95-100% and
does not allow people to log-in.. So I would like to erase these files, 
but whenever I try, it hangs the PC and utilization goes up. I have
tried to do a vrepair on the volume w.o any success. Still does the same
thing. I would like to see if there is a way to fix this without backing
up/deleting/restoring the volume.. 

Thanks.

Troy

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads