🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.os.netware.misc
5 messages
5 total messages Started by Kai G Palm Fri, 19 Feb 1999 00:00
NW 4.11 to NW5 migration
#729
Author: Kai G Palm
Date: Fri, 19 Feb 1999 00:00
32 lines
1843 bytes
We are about to _replace_ 3 NW 4.11, sp 6 servers (campus1, campus2,
campus3) with 3 new ones -->NW 5

The problem is that the new servers must replace the old ones. Due to
registry entries (containing UNC-paths)
in windows 95/NT-WS, the new servers will have to have same names as the
old ones.

Strategy:
- Backup w/ArcServe IT (sp1) SMS-compliant
- Install the new ones in the existing tree with different names from
the existing ones
- Let the 6 servers co-exist for a short period of time
- Let one of the new NW5-servers become the new master
- Sync
- Copy the data (user files, applications) from the old to the new
servers
- Take the 3 4.11-servers out of the three
- Rename the new servers to campus1, campus2, campus3

Is this the best (only?) way to do the migration?

Seems that TID 2934033 (suggests that one should install 4.11 and then
upgrade) does not apply to
our scenario, since we don't want to _upgrade_.We want to completely
remove the old servers and replace them with NW5.

Opinions anyone?

// Kai G Palm
dk.edb.netware m� gjerne svare p� dansk :-)
***Please remove spam to reply***
Re: NW 4.11 to NW5 migration
#730
Author: Pedro B. Morales
Date: Fri, 19 Feb 1999 00:00
23 lines
1619 bytes
Kai G Palm wrote:

> We are about to _replace_ 3 NW 4.11, sp 6 servers (campus1, campus2,
> campus3) with 3 new ones -->NW 5
>
> The problem is that the new servers must replace the old ones. Due to
> registry entries (containing UNC-paths)
> in windows 95/NT-WS, the new servers will have to have same names as the
> old ones.
>

The easiest way to do this, (since the servers must be conserved) is an
in-place upgrade.  Before you do this, make sure that Service Pack 6 is
installed, along with the DS411P.EXE patch for NetWare 4.11 NDS found in the
Novell Minimum Patch List at http://support.novell.com/misc/patlst.htm.

I would make a couple of backups of the NDS data before and after these
upgrades, and make sure they work.  Once you know they do, proceed to
install NetWare 5 on top of NetWare 4.11 by using the in-place upgrade
option.

Hope it helps,
Pedro B. Morales
Re: NW 4.11 to NW5 migration
#731
Author: Janp Hjemme
Date: Mon, 22 Feb 1999 00:00
31 lines
2007 bytes
Hei der.

Du m� se bedre p� TID2934033. Dette er akkurat det du m� gj�re. Les
dokumentet n�ye og f�lg det. Skal du ha den den samme strukturen p� den nye
serveren , bruk dette dokumentet. Viktig at du f�lger det som er nevnt om
Backup.ds p� system-omr�det. Denne fila skal du bruke til � restore NDS'en
p� den nye serveren. Du m� da v�re p�logget p� den gamle serveren mens du
lager en restore av NDS'en til sys:\system\backup.ds.
NB: meget VIKTIG:: Du m� kopiere denne filen til et annet omr�de f�r du
eventuellt restorer den agmle serveren igjen (Hvis du m� starte den igjen)
Har du lagt tilbake NDS'en fra denne filen kan du bruke den bare 1 gang.
Etterp� er den �delagt.
Det er ogs� viktg at du ikke legger tilbake omr�der som EtC, PUBLIC, SYSTEM,
MAIL slik det st�r i dette dokumentet.

Og husk at NDS'en  m� v�re frisk og uten feilmeldinger. Ellers g�r det rett
til h....

Mvh Jan Petter Wold, Norge    jpetterw@online.no



Kai G Palm skrev i meldingen <36CD1F47.D83A3DA2@hibu.nospam>...
>We are about to _replace_ 3 NW 4.11, sp 6 servers (campus1, campus2,
>campus3) with 3 new ones -->NW 5
>

>// Kai G Palm
>dk.edb.netware m� gjerne svare p� dansk :-)
>***Please remove spam to reply***
>
Re: NW 4.11 to NW5 migration
#732
Author: Lars Stokholm
Date: Tue, 23 Feb 1999 00:00
48 lines
2244 bytes
The easiest way to do this is to move the disk partitions (the DOS one
and the Netware one) to the new disk with "Norton Ghost for Netware"
www.ghost4nw.com addjust the startup.ncf so that it contains the correct
diskdrivers. 

Check and make sure that the server starts up in the right way.

Now do the upgrade to NW5

Make sure to make a backup before this operation :-)

MVH
Lars

Kai G Palm wrote:
> 
> We are about to _replace_ 3 NW 4.11, sp 6 servers (campus1, campus2,
> campus3) with 3 new ones -->NW 5
> 
> The problem is that the new servers must replace the old ones. Due to
> registry entries (containing UNC-paths)
> in windows 95/NT-WS, the new servers will have to have same names as the
> old ones.
> 
> Strategy:
> - Backup w/ArcServe IT (sp1) SMS-compliant
> - Install the new ones in the existing tree with different names from
> the existing ones
> - Let the 6 servers co-exist for a short period of time
> - Let one of the new NW5-servers become the new master
> - Sync
> - Copy the data (user files, applications) from the old to the new
> servers
> - Take the 3 4.11-servers out of the three
> - Rename the new servers to campus1, campus2, campus3
> 
> Is this the best (only?) way to do the migration?
> 
> Seems that TID 2934033 (suggests that one should install 4.11 and then
> upgrade) does not apply to
> our scenario, since we don't want to _upgrade_.We want to completely
> remove the old servers and replace them with NW5.
> 
> Opinions anyone?
> 
> // Kai G Palm
> dk.edb.netware m� gjerne svare p� dansk :-)
> ***Please remove spam to reply***
Re: NW 4.11 to NW5 migration
#733
Author: chrisa
Date: Wed, 24 Feb 1999 00:00
44 lines
2155 bytes
Read this:
http://www.novell.com/netware5/upgrade/4xtonw5.html
and
TID 2934033
and
TID 2919565

regards
chris

Kai G Palm wrote:

> We are about to _replace_ 3 NW 4.11, sp 6 servers (campus1, campus2,
> campus3) with 3 new ones -->NW 5
>
> The problem is that the new servers must replace the old ones. Due to
> registry entries (containing UNC-paths)
> in windows 95/NT-WS, the new servers will have to have same names as the
> old ones.
>
> Strategy:
> - Backup w/ArcServe IT (sp1) SMS-compliant
> - Install the new ones in the existing tree with different names from
> the existing ones
> - Let the 6 servers co-exist for a short period of time
> - Let one of the new NW5-servers become the new master
> - Sync
> - Copy the data (user files, applications) from the old to the new
> servers
> - Take the 3 4.11-servers out of the three
> - Rename the new servers to campus1, campus2, campus3
>
> Is this the best (only?) way to do the migration?
>
> Seems that TID 2934033 (suggests that one should install 4.11 and then
> upgrade) does not apply to
> our scenario, since we don't want to _upgrade_.We want to completely
> remove the old servers and replace them with NW5.
>
> Opinions anyone?
>
> // Kai G Palm
> dk.edb.netware m� gjerne svare p� dansk :-)
> ***Please remove spam to reply***
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads