Re: OS/2 and Hardware flow control...

Thread View: comp.os.os2.comm

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Tim Bridenbecker Sun, 22 Oct 1995 02:44

Author: Tim Bridenbecker
Date: Sun, 22 Oct 1995 02:44

33 lines
1627 bytes

In message <468s3v$dne@ryu.communique.net> - mango@ryu.communique.net (Raul Zig
helboim) writes:
>
>	I bet this is not OS/2 related, but I'll ask anyway...
>
>	If I enable hardware flow control on my modem (any modem, I have tried 
>	3 different brands) using the AT&K3 command, I am not able to go past
>	the CONNECT xxxx string. If I press a key, I can see the lights on the
>	modem blick, but nothing else happens.
>
>	If I disable hardware flow control (AT&K0), I have no problems whatsoever,
>	except that I loose characters and that 'xxxx' on 'CONNECT xxxx' is li-
>	mited to 38400.
>
>	(I am using unregistered copy of the latest SIO drivers, so xxxx could be
>	115000, and it is in some ocasions).
>
>	Hints ?
>-- 
>-----------------------------------------------------------------------------
>Raul Zighelboim                         e-mail:    mango@communique.net  
>Communique Inc.                            Tel:    504.527.6200
>Technical Specialist                       Fax:    504.527.6030 


You didn't specify wether you have internal or external modems. I'll
assume you have external modems.

Make sure you have buffered 16550 type UARTs in your box. If you are sure
you have these, try a different cable.

Regards,
Tim

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads