🚀 go-pugleaf

In <4gkl17$l92@dub-news-svc-4.compuserve.com>, dnedrow@csi.compuserve.com (David E. Nedrow) writes:
>In message <4gfjvi$fsa@nntpa.cb.att.com> - sudipta@pr20.pr.att.com (S.
>Bhawmik)
> writes:
>:>
>:>I have recently installed an adaptec AHA2840VL SCSI host adapter.
>:>However, it seems that Warp is failing to recognize the card.
>
>Well, it doesn't sound like a problem with OS/2, since the error message
>appears to occur before OS/2 begins loading (indicated by the white block in
>the upper left corner of the screen.)
>
>I just bought a 2840 and plan on installing it this weekend. I'll see if
>anything happens with my setup.
>
>Btw. the most recent 284x drivers can be found at
>ftp://ftp.adaptec.com/pub/BBS/os2/7700os2.exe.
>
>The .ADD file in this package is dated 09-06-95.
>
> -David
>  I work for CompuServe, but I speak only for myself.
>

I have found that most people (yes, I've have done this), put in the new card
and presto, the computer looks at you with sorrowful glass eyes.  Well, before
you change to configuration, add the new card, booting on the old one, and 
reconfigure to the new one. Shut down, move the drive to the new card and restart.
This usually works and is better than pulling your hair out.  It will also tell you
if your drivers work.

Good luck 

David Bray
dbray@cpgt.com
CP and G Technologies, Inc.
Voice   (301) 353.0690
Fax     (301) 253.3990
Manufacturing Quality Systems since 1986