🚀 go-pugleaf

 
> >>The recommended thing to do is put the SLOWEST memory in the first bank!  The  
> >>reason is this: the fast chip can always slow down to the speed of the slow  
> >>chip, but the slow chip can't keep up with the fast one. 
> > 
>  
> This must make it tuff on Pentiums with only two chips, since the CPU 
> loads from both chips at a time on with one big wide gulp!! 
>  
> C'mon folks, lets get our facts right and just lose this bogus thread. 
 
Nothing bogus about it..... Before I recently upgraded, I ran a 386/DX-33 
with 4 1MB 80ns 30 pin SIMMS in the first bank, and 4 70ns in the second. 
Even more interesting to note, was that the 80ns SIMMs in the 1st bank were 
of two different types, 3 chip, and 9 chip....  Never had much trouble with 
it, either.  Those are FACTS. 


============================================================== 
Mark Kissel 
mkissel@visuallink.com 
Did you exchange a walk-on part in the war, 
For a lead role, in a cage? - R.W. 
==============================================================