🚀 go-pugleaf

In article <1764@airgun.wg.waii.com> denham@hmsp04.wg3.waii.com (Scott Denham X7117) writes:
>In article <2B4B2A30.13984@news.service.uci.edu> rcaslis@hydra.acs.uci.edu (Russell Caslis) writes:
>
>(text deleted) 
>>I've heard that there is a jumper inside the unit that changes which
>>mode it defaults to.  Can anyone help me find that jumper?
>
>I was told both by our in house technicians and someone who works on 8500's
>for a living that there is no such jumper. I also have the preliminary
>user's manual for the 8500 (pub 510201-000) and it makes no mention of 
>such a jumper. The information on mode select implies but does not 
>explicitly state that the mode can only be set with the SCSI MODE SELECT
>command. 
>
>

The 8500 has a serial port on it, upper right when viewed from the back.
Exabyte gives out a program, "ctsmon" or something like that, which
lets a PC talk to this port (9600 baud).  It can load/exam drive
memory, registers, load/dump its firmware and default OPTION settings.
The F/W and options are stored in EErom.  Some of the mode selects
can be defaulted on powerup.  It is also to make a "option setting"
tape, either you can make it (via above PC), or probably get one
from Exabyte.  The tape can be loaded to set new options, without a PC,
and serial cable.  For more info Contact Jim Werder @ Exabyte,
303-447-7269.
--ghg