Problem with ARNS and MacSE

Thread View: comp.protocols.appletalk

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Hock Koon Lim Tue, 15 Dec 1992 15:13

#3538

Author: Hock Koon Lim
Date: Tue, 15 Dec 1992 15:13

18 lines
1061 bytes




    I am unable to see any AppleTalk zone after I login to ARNS server
with Async Atalk.  My MacSE is running MacOS 7.1 with MacTCP v1.1.1 loaded.
I have no problem to run the "async" program on the ARNS server.  However,
after the connection is make, there is not AppleTalk zones shown in the
chooser.  I did try to install the "SHeap" extension but it doesn't help.
I have no problem with the ARNS server  when I use it with a MacIIcx.


Thanks,

-- 
Hock-Koon Lim, Information Network services
Case Western Reserve University; Cleveland, Ohio, USA  44106   
(216) 368-2982        lim@ins.cwru.edu

Re: Problem with ARNS and MacSE

#3561

Author: Hock Koon Lim
Date: Thu, 17 Dec 1992 04:30

25 lines
1525 bytes

In article <1gksn8INNahv@usenet.INS.CWRU.Edu> lim@po.CWRU.Edu writes:
>
>
>    I am unable to see any AppleTalk zone after I login to ARNS server
>with Async Atalk.  My MacSE is running MacOS 7.1 with MacTCP v1.1.1 loaded.
>I have no problem to run the "async" program on the ARNS server.  However,
>after the connection is make, there is not AppleTalk zones shown in the
>chooser.  I did try to install the "SHeap" extension but it doesn't help.
>I have no problem with the ARNS server  when I use it with a MacIIcx.
>
>

  Well, the MacSE serial port with ARNS would not work if the serial port speed 
is higher then 9600 bps.  Thanks for the answer from David Hornsby - "Anything 
above 9600 is dubious on an SE".   I set the serial
port speed to 9600 and everything is working fine now.


Thanks a lot,


-- 
Hock-Koon Lim, Information Network services
Case Western Reserve University; Cleveland, Ohio, USA  44106   
(216) 368-2982        lim@ins.cwru.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads