🚀 go-pugleaf

This is a multi-part message in MIME format.

--------------64D39A12CAA
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

ANYONE HAVE ANY IDEAS????

--------------64D39A12CAA
Content-Type: message/news
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Path: imsai.canuck.com!usenet
From: dave@gang.cuug.ab.ca (Dave Cason)
Newsgroups: comp.unix.aix
Subject: AIX 4.1 & Eskertun Plus 8.0 & Novel 3.11
Date: 12 Sep 1996 18:45:45 GMT
Organization: Tri-Ener-Tech Petro Services Ltd.
Message-ID: <519lop$m9s@imsai.canuck.com>
NNTP-Posting-Host: ccc085.canuck.com
Mime-Version: 1.0
Content-Type: Text/Plain; charset=ISO-8859-1
X-Newsreader: WinVN 0.99.5

Hi,

We just got an IBM RISC box and AIX for our new server... We're using a product
called Eskertun 8.0 for the TCP/IP stack to talk to the server thru our Windows
PC's for a terminal emul. program. 

The old network was/is novell 3.11, supposedly you can run both the TCP/IP and 
the IPXODI/NETX on the same cards, ( 3Com's 3C509's ) 

Does anyone know how to configure the autoexec.bat and the config.sys and most 
of all the autotcp.bat for the eskertun tcp stack so that teh 3Com is running 
two vertual cards ?

We were running with two NIC's in each system but we want to pull the old 
Novell cards ( NE2000-Arcnet 's ) for obvious reasons ( don't laugh !! ) And 
run with both topos on the same NIC. I already switched the NIC in the Novell 
box to a 3C509 and re-config'ed the startnet etc, it's working fine. We're just 
haveing problems with the Eskertun stuff crashing the Novell box once the call 
is made to the autotcp.bat

Anyone have any ideas... or am I missing the bloody obvious !!

Cheers'

Dave

dcason@canuck.com 


--------------64D39A12CAA--