🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.soft-sys.matlab
Article #58

Re: Matlab4.0 versus Framemaker3.1.1

#58
From: Kevin Damour
Date: Mon, 25 Jan 1993 19:21
52 lines
2759 bytes
In article <1993Jan22.202455.18778@news.nd.edu> jeff@control.nd.edu (Jeffrey C. Kantor) writes:

   Path: rocket!uunet!spool.mu.edu!news.nd.edu!control!jeff
   From: jeff@control.nd.edu (Jeffrey C. Kantor)
   Newsgroups: comp.soft-sys.matlab
   Date: 22 Jan 93 20:24:55 GMT
   Sender: news@news.nd.edu (USENET News System)
   Reply-To: jeff@control.nd.edu
   Organization: University of Notre Dame
   Lines: 15

   I find myself unable to import eps files generated by Matlab 4.0 into
   Framemaker.  I get a frame, but no graphics either on the printer or
   the screen.

   The Mathworks says the postscript generation is improved in 4.0A, but
   that didn't directly answer my question of whether this particular problem
   will be fixed. 

   Does anyone else know?

   ---
   Jeffrey C. Kantor                   Email: Jeffrey.Kantor@nd.edu
   Dept. of Chemical Engineering       Voice: 219 631 5797
   University of Notre Dame              Fax: 219 631 8366
   Notre Dame, IN 46556

I just had to create some graphs to include in FrameMaker 3.1a (or x)
with version 4.0a Matlab.  The print command with -deps and -preview
worked just fine.  I could rezise and move the image around, but I
could not see the actual graph just a gray box representation.  See if
you site can upgrade to 4.0a that may solve your problems.  (I still
wish I could see the graph though).


     - kevin
        -----------------------------------------------------
Dr. Kevin T. Damour                              Lockheed Sanders Inc.
Principal Electrical Engineer                    PO Box 868,MER24-1583C
Signal Processing Center of Technology           Nashua, NH 03061-0868
(usenet)      ...!uunet!rocket!damour        voice (603)885-9122
(internet)    <damour@rocket.sanders.com>    fax   (603)885-0631


--
        -----------------------------------------------------
Dr. Kevin T. Damour                              Lockheed Sanders Inc.
Principal Electrical Engineer                    PO Box 868, MER24-1583C
Signal Processing Center of Technology           Nashua, NH 03061-0868

  (usenet)      ...!uunet!rocket!damour            voice (603) 885-9122
  (internet)    <damour@rocket.sanders.com>        fax   (603) 885-0631
Technical Details
Message-ID: <DAMOUR.93Jan25142122@hobbes.sanders.lockheed.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!rocket!newshost!damour
References: <1993Jan22.202455.18778@news.nd.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!rocket!newshost!damour
From: damour@hobbes.sanders.lockheed.com (Kevin Damour)
Newsgroups: comp.soft-sys.matlab
Subject: Re: Matlab4.0 versus Framemaker3.1.1
Message-ID: <DAMOUR.93Jan25142122@hobbes.sanders.lockheed.com>
Date: 25 Jan 93 19:21:22 GMT
References: <1993Jan22.202455.18778@news.nd.edu>
Sender: news@rocket.sanders.lockheed.com
Organization: Lockheed Sanders, Inc.
Lines: 52
In-reply-to: jeff@control.nd.edu's message of 22 Jan 93 20:24:55 GMT