Proper mask, transfer rate, etc.

Thread View: comp.sys.amiga.multimedia

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Mark Worden Thu, 04 Apr 1996 19:13

#1644

Author: Mark Worden
Date: Thu, 04 Apr 1996 19:13

40 lines
2065 bytes

Subject: Proper mask, transfer rate, etc.
Newsgroups: comp.sys.amiga.hardware
Organization: Compusult Limited - Public Access Unix 
Summary: 
Keywords: 
X-Newsreader: TIN [version 1.2 PL2]

Can anyone tell me what the proper mask, transfer rate, etc. should be on 
my A3000 with 100MB Quantum hard drive and a Zip drive?  Both drives have 
been formatted with the Fast File System (I have Workbench v2.1).

I checked out these settings using HDToolbox, and for my Zip drive these 
were the current settings:

	Mask: 0x7ffffffe
	Max. transfer rate: 0xffffff

I was told that I should have a mask of 0xfffffffc for the Zip drive (I 
didn't get a suggestion for the hard drive...maybe it should be the 
same?).  I tried this mask, but it didn't seem to make any difference (I 
didn't re-boot after changing it...should I?).

According to SysInfo v3.15, I'm only getting about 570K/sec 
transfer rate for the Zip drive, and about 750K/sec for the hard drive.  
I was told that SysInfo isn't the best for measuring these speeds, but 
that it should at least report better figures than this.

The hard drive *may* be a little fragmented, but the Zip drive shouldn't 
be too bad (I just got it recently).

Are the mask and transfer rates as defined in HDToolbox out to lunch, and 
if so what should they be?

Please e-mail me with any help.  Thanks.

--
/ Mark Worden                           mworden@public.compusult.nf.ca \
| St. John's, Newfoundland, Canada      Member of TEAM AMIGA           |
| "The smallest good deed is greater than the best good intention."    |
\ "John Doe: generic tractor the John Deere Co. is coming out with."   /

Re: Proper mask, transfer rate, etc.

#1645

Author: Mark Worden
Date: Thu, 04 Apr 1996 19:14

15 lines
1167 bytes

Mark Worden (mworden@public.compusult.nf.ca) wrote:

: Can anyone tell me what the proper mask, transfer rate, etc. should be on 
: my A3000 with 100MB Quantum hard drive and a Zip drive?  Both drives have 
: been formatted with the Fast File System (I have Workbench v2.1).

: I checked out these settings using HDToolbox, and for my Zip drive these 

Darn!  I was in the wrong newsgroup when I posted this...sorry!

--
/ Mark Worden                           mworden@public.compusult.nf.ca \
| St. John's, Newfoundland, Canada      Member of TEAM AMIGA           |
| "The smallest good deed is greater than the best good intention."    |
\ "John Doe: generic tractor the John Deere Co. is coming out with."   /

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads