🚀 go-pugleaf

On 10 Sep 96 19:12:56 -800 Joseph Waldvogel (joewald@a.crl.com) wrote:

> >I'm currently using gwcslip.device and Amitcp, and was having trouble driving
> >my modem @115200 baud. I've tested it with Miami, and it will actually run at
> >this speed, so my only assumption is that gwcslip.device will not.

> >Does anyone want to suggest another (c)slip device (that will downgrade
> >automatically from cslip to slip if necessary)? It should include its own
> >dialer (although I can try dialer.device, which I use at the moment)

> If Miami works, then why not keep using it!  As for another device for
> AmiTcp, why not use SLIP or CSLIP that come with AmiTCP in the first
> place?  None of them have Built in dialers though.  The ONLY one with
> a Dialer built in would be AmiPPP.  So if you want to use the
> ppp.device then use AmiPPP.

>  How do you know Miami is really working at 115200 baud?  You do know
> a Normal Amiga is not going to support such a speed in the first place
> don't ya?  Really need a 040 or 060 processor, and even then it's a
> maybe.  SOme people say you can with a 030, but I had no luck with my
> 50Mzh 030 on my A1200. But then I don't use a 640x200 mode, but a High
> Res MultiScan Productivity mode which is more depanding, and Screen
> depth also makes a differance.  Best way is with a differnt serial
> port other then commodores outdated slow built in serial port which
> was fine for the A1000 back then when 9600 baud modems were still
> rare, but not now.

Using a fast serial.device replacement will help a lot. Get 8n1.device or
BaudBandit.device from Aminet.

--
Regards,

/��������������������������������T���������������������������������������\
| Rask Ingemann Lambertsen       | E-mail: rask@kampsax.dtu.dk           |
| Amiga GNU CC README maintainer | WWW: http://www.gbar.dtu.dk/~c948374/ |
| Registered Phase5 developer    | "ThrustMe" on XPilot, ARCnet and IRC  |
| Keyboard error: <Ctrl> and <Alt> are stuck - press <Del> to continue   |