ZIP Dram Pin 1 ???

Article View: comp.sys.amiga.tech

Article #12539

Back to comp.sys.amiga.tech Previous Next

#12539

From: Steve Stamper
Date: Sat, 06 May 1989 04:10

11 lines
961 bytes

I have some 256kX4 bit, 100 ns, ZIP package DRAMS I want to install
in my A2620 card.  It says in the manual that the square edge is 
pin 1's edge, but a mark on the back of the ZIP enclosure indicates
that pin 1 is on the rounded edge.  There are 2 round dots on the
front of the ZIP package, one on the upper right hand side (square
side) one on the lower left hand side (rounded side).  
Where is Pin 1 of a ZIP package DRAM?  I think it must be
towards the rounded edge, by the lower dot on the front of the
package (by lower I mean closer to the metal pins).

-Roger

Technical Details

Message-ID: <793@manta.NOSC.MIL>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!ucsd!helios.ee.lbl.gov!nosc!manta!dwi

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!ucsd!helios.ee.lbl.gov!nosc!manta!dwi
From: dwi@manta.NOSC.MIL (Steve Stamper)
Newsgroups: comp.sys.amiga.tech
Subject: ZIP Dram Pin 1 ???
Message-ID: <793@manta.NOSC.MIL>
Date: 6 May 89 04:10:34 GMT
Reply-To: dwi@manta.nosc.mil.UUCP (Steve Stamper)
Organization: Naval Ocean Systems Center, San Diego
Lines: 11