Article View: comp.sys.amiga.tech
Article #2358Re: Zorro II pinout
From: Dave Haynie
Date: Mon, 27 Nov 1989 20:57
Date: Mon, 27 Nov 1989 20:57
16 lines
1076 bytes
1076 bytes
in article <3131@hub.UUCP>, dougp@voodoo.ucsb.edu says:
> I'd like to know what signal is on pin 20 of the 100 pin edge connector
> of the A2000 zorro II buss.
That's bus, not buss. Kissing computers can be a shocking experience.
Anyway, pin 20 on the A2000 bus is -12VDC. All backplanes should provide
this supply, though I think you'll find only a very small number of
cards will actually require it.
> Douglas Peale
--
Dave Haynie Commodore-Amiga (Systems Engineering) "The Crew That Never Rests"
{uunet|pyramid|rutgers}!cbmvax!daveh PLINK: hazy BIX: hazy
Too much of everything is just enough
Technical Details
Message-ID:
<8722@cbmvax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mephisto!prism!fsu!stat!uflorida!mailrus!cs.utexas.edu!usc!apple!oliveb!amiga!cbmvax!davehReferences:
<3131@hub.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mephisto!prism!fsu!stat!uflorida!mailrus!cs.utexas.edu!usc!apple!oliveb!amiga!cbmvax!daveh From: daveh@cbmvax.UUCP (Dave Haynie) Newsgroups: comp.sys.amiga.tech Subject: Re: Zorro II pinout Message-ID: <8722@cbmvax.UUCP> Date: 27 Nov 89 20:57:20 GMT References: <3131@hub.UUCP> Distribution: usa Organization: Commodore Technology, West Chester, PA Lines: 16