Enforcer Question

Thread View: comp.sys.amiga.tech

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by joachim Wed, 19 Dec 1990 01:52

#7556

Author: joachim
Date: Wed, 19 Dec 1990 01:52

22 lines
1009 bytes

Hi -

I've got a question concerning the enforcer4 debugging tool:

Currently I'm using a non-DMA, non-autoconfig HD-Controler which is
memory-mapped around 0xEF0000.

The enforcer4 doesn't like the device's accesses to these locations thus
disabling any access to the HD.

My question:

Is there a way to convince the enforcer that reads & writes to a specific area
is ok (e.g. by manipulating system structures) ?

Should anybody out there in Netland know the answer please let me know .

Regards
	Peter Joachim <joachim@urz.unibas.ch>

PS: Thanks a lot to the authors of enforcer! This little program made debugging
really VERY MUCH easier!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads