Re: Composite monitor

Article View: comp.sys.atari.st

Article #3500

#3500

From: Mark O'Bryan
Date: Wed, 30 Aug 1989 02:25

14 lines
1012 bytes

In article <19540@usc.edu>, mbaffoni@skat.usc.edu (Michael Baffoni) writes:
> 
>    Also, don't you have to worry about attenuating the signal from this
> port - I think I remember an earlier discussion (about Sony monitors) where
> their input levels are not quite the same as the output from the ST?  Or is
> it entirely case dependent upon the type of monitor you are hooking it to?

Nope, the composite levels are just fine.  It's the RGB levels that are too
hot for the Sony monitors.

-- 
Mark T. O'Bryan                 Internet:  obryan@gumby.cc.wmich.edu
Western Michigan University
Kalamazoo, MI  49008

Technical Details

Message-ID: <838@gumby.cc.wmich.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!gumby!obryan

References: <1098@accuvax.nwu.edu> <19540@usc.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!gumby!obryan
From: obryan@gumby.cc.wmich.edu (Mark O'Bryan)
Newsgroups: comp.sys.atari.st
Subject: Re: Composite monitor
Message-ID: <838@gumby.cc.wmich.edu>
Date: 30 Aug 89 02:25:15 GMT
References: <1098@accuvax.nwu.edu> <19540@usc.edu>
Distribution: usa
Organization: Western Michigan University, Kalamazoo, MI
Lines: 14

Reply to Parent Message