Article View: comp.sys.atari.st
Article #40215Re: Cartridge port connectors
From: John Purbrick
Date: Thu, 11 Jan 1990 05:30
Date: Thu, 11 Jan 1990 05:30
14 lines
1077 bytes
1077 bytes
In article <900108.22294364.040310@SFA.CP6> Z4648252@SFAUSTIN.BITNET (Z4648252) writes: > Does anyone know a U.S. source for project boards and connector >pieces that will fit the cartridge port. Yes. Douglas Electronics, 718 Marina Blvd, San Leandro Ca 94577: 415-483-8770 Their cartridge port connector is part 33-DE-40, priced at $10.00 the last time I bought one a year ago; they take credit cards. Their connector is a board about 3" x 5" with the connector at one end and enough room for a few ICs and/or a 40-pin flat cable connector. John Purbrick jpexg@ai.mit.edu
Technical Details
Message-ID:
<5850@rice-chex.ai.mit.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think!snorkelwacker!ai-lab!jpexgReferences:
<900108.22294364.040310@SFA.CP6>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think!snorkelwacker!ai-lab!jpexg From: jpexg@wheaties.ai.mit.edu (John Purbrick) Newsgroups: comp.sys.atari.st Subject: Re: Cartridge port connectors Message-ID: <5850@rice-chex.ai.mit.edu> Date: 11 Jan 90 05:30:45 GMT References: <900108.22294364.040310@SFA.CP6> Reply-To: jpexg@rice-chex.MIT.EDU (John Purbrick) Organization: The MIT AI Lab, Cambridge, MA Lines: 14