Connecting to a PACX line through uVAX II serial port

Article View: comp.sys.dec

Article #1768

#1768

From: Ames Grisanti
Date: Thu, 26 Jul 1990 20:46

20 lines
1232 bytes

Hi, 
   
   I would like to know if anyone can help with the 
following problem. I have a uVAX II and have one of the
serial ports connected to a PACX so I can have access
to other systems.  The problem is that in order to get
a login prompt from the PACX I must send a break signal.
What I initially wanted to do was use Kermit-32 as the
interface between my terminal and the port connected to 
the PACX. I have since found out that Kermit-32 is not 
capable of sending a break, so I can't connect to the PACX
using kermit.  Does anyone have a suggestion as to how I
might be able to use my VAX as an interface to the PACX.

Thanks,

Ames Grisanti
[grisanti@plains.NoDak.edu      --         Internet]
[grisanti@plains or ndsuvax     --         Bitnet  ]
[uunet!plains!grisanti          --         UUCP    ]

Technical Details

Message-ID: <5359@plains.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!emory!ogicse!plains!grisanti@plains.NoDak.edu

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!emory!ogicse!plains!grisanti@plains.NoDak.edu
From: grisanti@plains.NoDak.edu (Ames Grisanti)
Newsgroups: comp.sys.dec
Subject: Connecting to a PACX line through uVAX II serial port
Message-ID: <5359@plains.UUCP>
Date: 26 Jul 90 20:46:11 GMT
Sender: grisanti@plains.UUCP
Organization: UND Energy Research Center
Lines: 20