using DS200/MC w/ Hays modems for dial in/out

Article View: comp.sys.dec

Article #5296

#5296

From: Ray Curci (scri)
Date: Thu, 06 Apr 1989 17:40

17 lines
1296 bytes

We have two DEC Server 200/MCs that I am trying to make work with
non-DEC modems.  I would like to access them though our 8700 running VMS v4.7a
soon to run v5.1.  Having the for dial up works fine, but the dial-out is
the problem.  For some reason, about every 30 seconds, the DS200 is toggling
the modem status lines, including DTR.  This normally causes the modem to
hangup.  When I configure the modems to ignore DTR, they sometimes are able
to successfully dial out, but often get hosed up requiring a reset.
Ideally, I would like to be able to have 2400/1200 dial in/out capability.
Short of buying DEC-modems, does anyone have any suggestions?

Thanks in advance,

Raymond Curci
Florida State University Supercomputer Institute

inet:   curci@stat.fsu.edu
span:   scri::curci   or   7501::curci

Technical Details

Message-ID: <570@loligo.cc.fsu.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!accuvax.nwu.edu!tank!ncar!ames!haven!uflorida!gatech!prism!loligo!stat!curci

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!accuvax.nwu.edu!tank!ncar!ames!haven!uflorida!gatech!prism!loligo!stat!curci
From: curci@stat.uucp (Ray Curci (scri))
Newsgroups: comp.sys.dec
Subject: using DS200/MC w/ Hays modems for dial in/out
Message-ID: <570@loligo.cc.fsu.edu>
Date: 6 Apr 89 17:40:43 GMT
Sender: news@loligo.cc.fsu.edu
Reply-To: curci@stat.fsu.edu (Ray Curci (scri))
Organization: Dept. of Statistics, Florida State Univ.
Lines: 17