🚀 go-pugleaf

Hi Larry,

Long time no 'see'. How are you? The Monster 3D runs fine in 800x600
mode, and can be set to a maximum refresh rate of 120 Mhz. If your
monitor doesn't support such a high refresh rates, other options are
60, 75 and 85 Mhz. One of those refresh rates are supported by most of
today's monitors.
I myself am using the drivers that are available at www.3dfx.com and
they come with this handy utility that will let you change the
refreshrates to the above values. This utility can be accesed via a
tab in the Display applet in your control panel.

Sindar MS_MVP

On Sun, 8 Feb 1998 07:58:34 +0300 , Larry Schachter
<lrscpa@5carroll.com> wrote:

>Have a new PII-300, 128 MB RAM, with an STB Velocity 128 (Riva 128), and
>a 19" monitor.  The Riva works great, but just to muck up the works, I
>decided to throw in my Monster 3D.
>
>Problem is with all this heavy iron, I can't do better than 60 HZ at
>640*480 and 800*600 with Desktop|Properties|Monster 3D settings.  I even
>tried putting SET SST_SCREENREFRESH=75 in my autoexec.bat, only to have
>this parameter overwritten back down to 60 each time I access the
>Monster 3D settings.  Am using version 1.09 of Monster drivers and v1.30
>of the STB Velocity 128.
>
>Could the problem lie with my monitor.inf file?
>
>Any help appreciated!
>
>E-mail response appreciated!
>--
>Larry Schachter
>lrscpa@5carroll.com
>
>****>For E-mail reply, please remove the 5 from the return address<****
>
>