🚀 go-pugleaf

In article <825542988.21235@conamore.demon.co.uk>
           unknown@unknown.account.com "C.M.Porter" writes:

> In article <825457405snz@longley.demon.co.uk>, David Longley
> <David@longley.demon.co.uk> wrote:
> > Just for the record, I've struggled with a similar problem except on mine,
> > it reads the first half of the disk fine, the second half produces read
> > errors. Like you I feel peeved that it's only worked for a year, and during
> > that period it's had only light use (good marketing trick CD-ROMs !).
> > 
> > Mind you - I haven't given up....I am after the motors...so anyone who has
> > junked their 562 or 563 please contact me for an address to send your motors
> > to, I'm not sure if there are one or two, but they *are* very small.
> > -- 
> > David Longley
> 
> I have also had trouble with a CR562 if first failed intermittently the stoped
> working all together I carefully stripped the spindal motor and found that the
> contacts on the comutator were clogged up with metal. I cleaned out the gaps
> with a pin and its been working fine for the last 6 monthes
> 
> Chris Porter
> 
Are there two motors or only one? Which one did you strip down, and where
exactly is it?
-- 
David Longley