🚀 go-pugleaf

        My Panasonic 24X SCSI CD-ROM (508) does DAE very well, better than I
actually expected. I've burned quite a few audio CD-Rs without a single
coaster, and I can not tell a difference between the originals and the
copies.
        For audio I do normally burn at 2X, I just feel better that way,
though I have not had any problems at all when I do burn at 4X. All my data
CDs are burned at 4X unless the data is critical (in which case I want the
security of burning at 2X)
        This isn't related but all of my copies have worked perfectly with 5
different CD-ROMs, 2 car stereos, and 5 CD players... so I have had no
compatibility problems at all.
        My CD-R drive is an internal Yamaha 4260, my SCSI card is the Asus
SC-875, and I use Sony media for audio.

Jon Aycan
sim@gamestats.com
-----------------
The SimGateway - http://sim.gamestats.com
SC3000 Gateway - http://sc3000.gamestats.com

Maurice Mahady wrote in message ...
>Weve supplied a lot of 508s and 586 587 etc and surprisingly the IDE drives
>are much faster for DAE, (6x on SCSI 13 * IDE!) Have never hooked up the
>7502 with a scsi reader on anyhthing less than a PCI ultra scsi and Id be
>somewhat doubtful youll get reliable 4x burns with a 1502. My favorite for
>price performance is the Advansys 930 for around $150 PCI, busmastering
>ultra SCSI bootable bios, at least as good as an Aadpatec  2940 for less
>than half the price.

Weve supplied a lot of 508s and 586 587 etc and surprisingly the IDE drives
are much faster for DAE, (6x on SCSI 13 * IDE!) Have never hooked up the
7502 with a scsi reader on anyhthing less than a PCI ultra scsi and Id be
somewhat doubtful youll get reliable 4x burns with a 1502. My favorite for
price performance is the Advansys 930 for around $150 PCI, busmastering
ultra SCSI bootable bios, at least as good as an Aadpatec  2940 for less
than half the price.
Alex wrote in message <6s3n23$6bl$1@krakatua.lavalink.com.au>...
>Hi all,
>
>I have an Adaptec 1502 ISA SCSI-2 card with a Panasonic 7502 burner. I am
>interested in buying a SCSI Panasonic 24x (model 508-B) to use with this
>burner.
>
>1. What is the DAE like? How fast?
>2. Any problems reading burnt audio CDs?
>3. Noise levels and vibration?
>4. Will my 1502 be able to handle both the burner and the 24x
simultaneously
>without the 24x having to slow down?
>
>Thanks, please email
>
>

Alex wrote:

> Hi all,
>
> I have an Adaptec 1502 ISA SCSI-2 card with a Panasonic 7502 burner. I am
> interested in buying a SCSI Panasonic 24x (model 508-B) to use with this
> burner.
>
> 1. What is the DAE like? How fast?
> 2. Any problems reading burnt audio CDs?
> 3. Noise levels and vibration?
> 4. Will my 1502 be able to handle both the burner and the 24x simultaneously
> without the 24x having to slow down?
>
> Thanks, please email

  I wouldn't use the 1502 for anything faster than 8X CD-ROMs. I tried running a
Plextor 12Plex off of one (a ZIP ZOOM, actually) and couldn't get the full
speed. It's only a basic, 16-bit, PIO-mode controller. Trying to run both a CD
and CD-R simultaneously would generate a large number of drink coasters.

  Look for a busmastering controller, such as the Adaptec 2940 series (not the
2920) or similar other brands.

--
If there is a no_junk in my address, please REMOVE it before replying!
All junk mail senders will be prosecuted to the fullest extent of the law!!
http://www.ntsource.com/~andyross

I have the panasonic 508-B 24x Cdrom drive.

The only problem I have with it is it won't read gold CDR's with andio on it
but gold data disks works fine. The green and blue it has no problems at
all.

I have come across alot of CD playes (audio) that wil not read the gold
disks.




Alex wrote in message <6s3n23$6bl$1@krakatua.lavalink.com.au>...
>Hi all,
>
>I have an Adaptec 1502 ISA SCSI-2 card with a Panasonic 7502 burner. I am
>interested in buying a SCSI Panasonic 24x (model 508-B) to use with this
>burner.
>
>1. What is the DAE like? How fast?
>2. Any problems reading burnt audio CDs?
>3. Noise levels and vibration?
>4. Will my 1502 be able to handle both the burner and the 24x
simultaneously
>without the 24x having to slow down?
>
>Thanks, please email
>
>