🚀 go-pugleaf

From the description of your problem I was not able to ascertain exactly what
might be the problem. See below and send to:

technical@abit.com.tw

Below we provide a short form of items to help us to process your data
quickly.

In describing your problem remember to use concise and precise language.

Thanks,

Jeremy ABIT
-----------------------------------------------------------------------------
---


About You
Name:
Your Return-Email:
Your Fax-Number:



About Your System

Motherboard
Motherboard name:
Motherboard Rev.#:
BIOS ID#:
Driver Rev. (see diskette):
Your OS:

Other Hardware
CPU (brand/MHz):
 Overclocked:  toMHz

HDD
IDE 1 Master Brand
              Slave Brand
IDE 2 Master Brand
              Slave Brand

CD-ROM Drive
IDE 1 Master Brand
              Slave Brand
IDE 2 Master Brand
              Slave Brand

System Memory (DRAM):
DIMM 1

ECC EDO RAM
EDO RAM
ECC SDRAM
SDRAM
      Brand:
DIMM 2

ECC EDO RAM
EDO RAM
ECC SDRAM
SDRAM
     Brand:
DIMM 3

ECC EDO RAM
EDO RAM
ECC SDRAM
SDRAM
     Brand:
DIMM 4

ECC EDO RAM
EDO RAM
ECC SDRAM
SDRAM
     Brand:

SIMM 1

FP DRAM
ECC EDO RAM
EDO RAM
     Brand:
SIMM 2

FP DRAM
ECC EDO RAM
EDO RAM
     Brand:
SIMM 3

FP DRAM
ECC EDO RAM
EDO RAM
     Brand:
SIMM 4

FP DRAM
ECC EDO RAM
EDO RAM
     Brand:

COAST:

Add-On Card (PCI/ISA)
1.:
2.:
3.:
4.:

Any Other Devices
1.:
2.:
3.:
4.:


Choose a descriptive Subject Line
Please describe your problem:








In article <6vc80d$af3$1@pavlov.midco.net>,
  "Paul Thronson" <pthronson@midco.net> wrote:
> I think it is bad but I hope I am overlooking something! When I power up,
> all the devices get power (except the fan on the Celeron) but no video and I
> can tell by the noise the HD makes it is not trying to boot up. I tried the
> Celeron in another computer and it works. I tried a PCI vid card in the
> board and same thing. I tried to isolate JUST the board by leaving it on a
> table with just the memmory, video, and processor and same thing. When I
> take the mem out, none of the devices even seem to get power (although the
> fan turns on and the CD light comes on --- the tray won't open and the HD
> doesn't spin up) What is all this telling me? Could it be anything else? I
> don't have any experience troubleshooting these Slot One boards.
>
> Thanks,
> Paul
>
>

-----------== Posted via Deja News, The Discussion Network ==----------
http://www.dejanews.com/       Search, Read, Discuss, or Start Your Own