Re: SIX PACK PLUS multi I/O Card.....HELP

Article View: comp.sys.ibm.pc.misc

Article #10432

Back to comp.sys.ibm.pc.misc Previous Next

#10432

From: Michael Schuster
Date: Sat, 19 Dec 1992 12:59

35 lines
1374 bytes

I've sent you the clock driver by email.

Your diagram seems to be that of a Type 1 (of FOUR) SixPack Plus.

SW1-06 control the size and starting address of the card memory.

To add 384K to a PC or XT, the settings should be:

START ADDRESS  256K   SW1 off   SW2 and 3 ON
CARD MEM SIZE  386K   SW4-5 on  SW6 off
SW7 - N/A
SW8 on = parity enable

Port enable block:
   1 = com1: on
   2 = com2: on
   3 = lpt1: on
   4 = lpt2: on
   5 = game port on
   6 = clock on

IRQ block:
  3S = irq3 for com1:
  4s = irq3 for com2:
  4,5,7,2 = leave open

IRQ7 block - install for LPT1:

The RS232 jumper block controls handshaking lines. For most cases
leave the 3 jumpers between the middle and left pins of each row.  

-- 
_______________________________Mike Schuster________________________________
NY Pub. Access UNIX/Internet: schuster@panix.com | 70346.1745@CompuServe.COM
The Portal (R) System: schuster@shell.portal.com | MCI Mail,GEnie: MSCHUSTER

Technical Details

Message-ID: <1992Dec19.125926.25061@panix.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!news.ans.net!cmcl2!panix!schuster

References: <1992Dec18.222549.28464@kth.se>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!news.ans.net!cmcl2!panix!schuster
From: schuster@panix.com (Michael Schuster)
Subject: Re: SIX PACK PLUS multi I/O Card.....HELP
Message-ID: <1992Dec19.125926.25061@panix.com>
Date: Sat, 19 Dec 1992 12:59:26 GMT
References: <1992Dec18.222549.28464@kth.se>
Organization: PANIX Public Access Unix & Internet, NYC
Lines: 35

Reply to Parent Message