Re: Star SG-10 Dot Matrix Printer : HELP.

Article View: comp.sys.ibm.pc.misc

Article #11705

Back to comp.sys.ibm.pc.misc Previous Next

#11705

From: John Larson
Date: Mon, 11 Jan 1993 06:00

23 lines
1231 bytes

This is straight from the Gemini Manual concerning the 4 switches 
 
     DIP switches 3&4 should be turned off on your Gemini,
and the other 2 may be set according to your operational requirements.
     Switch 2 should be set to off if you want Gemini to print every time
it recieves a CR code; set it to ON if you wish to have the CR ignored and
printing only when the buffer is full.
     That was from the Tech notes for the IBM

Description of the Switches themselves
    
1   No Paper Detect
2   Buffer Full
3   Bit Select   (On 7 Bits)   Off 8 Bits
4   Auto Line feed

   Hope this helps  
 

ProLine:  jlars@pro-storm
Internet: jlars@pro-storm.cts.com
UUCP:     crash!pro-storm!jlars
Bitnet:   jlars%pro-storm.cts.com@nosc.mil

Technical Details

Message-ID: <ab02461@pro-storm.cts.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!usc!sol.ctr.columbia.edu!ucselx!crash!pro-storm!jlars

References: <86381@ut-emx.uucp>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!usc!sol.ctr.columbia.edu!ucselx!crash!pro-storm!jlars
From: jlars@pro-storm.cts.com (John Larson)
Subject: Re: Star SG-10 Dot Matrix Printer : HELP.
Organization: ProLine [Pro-Storm] -- Dallas, TX -- 214/644-5113
Date: Mon, 11 Jan 93 00:00:35 CST
Message-ID: <ab02461@pro-storm.cts.com>
In-Reply-To: vcm@ccwf.cc.utexas.edu (V. Chandramouli)
References: <86381@ut-emx.uucp>
Lines: 23

Reply to Parent Message