🚀 go-pugleaf

BARTH@HSP.zer.de (Ruediger Barth) wrote:
>Hallo Leute !
>
>ich moechte demnaechst mein Elitegroup PCI Board UM8810P-AOI mit einem AMD DX  
>4/100 betreiben (momentan ist ein Intel DX 2/66 im Einsatz). Das studieren  
>der Dokementation gab leider keinen eindeutigen Hinweis auf die  
>Einstellungen. Der AMD hat m.M. 3,3V Versorgungsspannung und wird intern die  
>Taktrate verdreifachen.
>
>Hat von den Lesern einer Erfahrungen mit dieser Kombination und kann mir  
>Hinweise und Tips geben ?
>
>
>Ciao
>
>Ruediger
>
>--
>
>-----------------------+--------------------------------------------------
>Ruediger Barth         |V+49-5257-4845         barth@HSP.zer.de
>Raiffeisenstrasse 34   |
>D-33161 Hoevelhof      |
>-----------------------+-------------------------------------------------
>## CrossPoint v3.02 ##



Okay few!,

I've managed to sort off translate what you are trying to say.

From what i can read, you have a Um8810 motherboard and want 
to upgrade to a AmDX4-100.

I have the same motherboard and had some "difficulties" well 
it was actualy fortunate!, with a AmDX2-80 . It tripled the 
internal clock instead of doubling it. The only way I could 
get clock doubling was to solder the B13 pin to GROUND. (if 
you leave this pin floating, as on the Um8810P, it will triple 
the clock)

To cut a long story short, you configure the jumpers as stated 
in the manual for the INTEL DX4-100 (the AMD and INTEL DX4's 
are pin compatible). It should tripple the internal clock as 
required.

Dion Burger