Request information for Maxitor 7080AT, 7213AT

Article View: comp.sys.ibm.pc

Article #14050

#14050

From: Mike Chang
Date: Wed, 23 Dec 1992 01:58

17 lines
1087 bytes

Hi,

I recently bought two used maxitor drives without documents. I was
wondering if anyone can find the parameters for Maxitor 7080AT and
7212AT (cylinder,head,sector number,etc). I also would like know
what the jumper settings are for master,slave and single drive
configurations. Thanks much.

Happy holiday.

Mike
--
   The opinions expressed are not necessarily those of the University of
     North Carolina at Chapel Hill, the Campus Office for Information
        Technology, or the Experimental Bulletin Board Service.
           internet:  laUNChpad.unc.edu or 152.2.22.80

Technical Details

Message-ID: <1992Dec23.015858.11448@samba.oit.unc.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!concert!samba!usenet

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!concert!samba!usenet
From: Mike.Chang@launchpad.unc.edu (Mike Chang)
Subject: Request  information for Maxitor 7080AT, 7213AT
Message-ID: <1992Dec23.015858.11448@samba.oit.unc.edu>
Sender: usenet@samba.oit.unc.edu
Nntp-Posting-Host: lambada.oit.unc.edu
Organization: University of North Carolina Extended Bulletin Board Service
Date: Wed, 23 Dec 1992 01:58:58 GMT
Lines: 17