Article View: comp.sys.ibm.pc
Article #14051Re: Request information for Maxitor 7080AT, 7213AT
From: Mike Chang
Date: Wed, 23 Dec 1992 02:03
Date: Wed, 23 Dec 1992 02:03
18 lines
1189 bytes
1189 bytes
>I recently bought two used maxitor drives without documents. I was
>wondering if anyone can find the parameters for Maxitor 7080AT and
>7212AT (cylinder,head,sector number,etc). I also would like know
------
>what the jumper settings are for master,slave and single drive
>configurations. Thanks much.
>
>Happy holiday.
Oops, I meant 7213AT drive.
--Mike
--
The opinions expressed are not necessarily those of the University of
North Carolina at Chapel Hill, the Campus Office for Information
Technology, or the Experimental Bulletin Board Service.
internet: laUNChpad.unc.edu or 152.2.22.80
Technical Details
Message-ID:
<1992Dec23.020307.11722@samba.oit.unc.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!gatech!concert!samba!usenetReferences:
<1992Dec23.015858.11448@samba.oit.unc.edu>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!concert!samba!usenet From: Mike.Chang@launchpad.unc.edu (Mike Chang) Subject: Re: Request information for Maxitor 7080AT, 7213AT Message-ID: <1992Dec23.020307.11722@samba.oit.unc.edu> Sender: usenet@samba.oit.unc.edu Nntp-Posting-Host: lambada.oit.unc.edu Organization: University of North Carolina Extended Bulletin Board Service References: <1992Dec23.015858.11448@samba.oit.unc.edu> Date: Wed, 23 Dec 1992 02:03:07 GMT Lines: 18