Article View: comp.sys.ibm.pc
Article #42708PC Batteries
From: Scherer
Date: Tue, 20 Feb 1990 14:30
Date: Tue, 20 Feb 1990 14:30
8 lines
753 bytes
753 bytes
If a battery is soldered on an AT system board and needs it to be replaced
do you have to unsolder it before connecting an external battery. Also
is it possible to see the difference in appearance between a NICAD and
Lithium battery.
Responses can be posted or mailed as I check both daily.
Thanks in Advance
Technical Details
Message-ID:
<1060@nems.dt.navy.mil>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!usc!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!tank!mimsy!nems!dtrc!schererShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!usc!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!tank!mimsy!nems!dtrc!scherer From: scherer@dtrc.dt.navy.mil (Scherer) Newsgroups: comp.sys.ibm.pc Subject: PC Batteries Message-ID: <1060@nems.dt.navy.mil> Date: 20 Feb 90 14:30:11 GMT Sender: news@nems.dt.navy.mil Reply-To: scherer@dtrc.dt.navy.mil (Doug Scherer) Organization: David Taylor Research Center, Bethesda, MD Lines: 8