Re: PC Batteries

Article View: comp.sys.ibm.pc

Article #42709

#42709

From: daly Patrick Daly
Date: Tue, 20 Feb 1990 16:52

16 lines
1328 bytes

In article <1060@nems.dt.navy.mil> scherer@dtrc.dt.navy.mil (Doug Scherer) writes:
>    If a battery is soldered on an AT system board and needs it to be replaced
>do you have to unsolder it before connecting an external battery. Also
>is it possible to see the difference in appearance between a NICAD and
>Lithium battery.

My old PC supposedly had a Nicad somewhere on the motherboard that requires
the system to be running for some length of time on a somewhat regular
basis (how's that for being specific ;-> ) to keep it charged up.

I never bothered to locate it since the system used an external lithium battery
(which was selected by means of a jumper).  The lithium was velcroed to the
case and had a 2 wire connector to connect it to the mother board.

The old lithium battery was blank, but the replacement I put in had
clear markings as to what it was.

Technical Details

Message-ID: <12867@masscomp.ccur.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!jarthur!usc!samsung!think!masscomp!cgull!daly

References: <1060@nems.dt.navy.mil>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!jarthur!usc!samsung!think!masscomp!cgull!daly
From: daly@cgull..westford.ccur.com (Patrick Daly)
Newsgroups: comp.sys.ibm.pc
Subject: Re: PC Batteries
Message-ID: <12867@masscomp.ccur.com>
Date: 20 Feb 90 16:52:18 GMT
References: <1060@nems.dt.navy.mil>
Sender: news@masscomp.ccur.com
Reply-To: daly@cgull.westford.ccur.com (Patrick Daly)
Organization: Concurrent Computer Corporation, Westford MA
Lines: 16

Reply to Parent Message