Article View: comp.sys.ibm.pc
Article #43541Re: Perstor comments wanted.
From: Larry Snyder
Date: Tue, 06 Mar 1990 01:27
Date: Tue, 06 Mar 1990 01:27
21 lines
1433 bytes
1433 bytes
In article <6991@tekgvs.LABS.TEK.COM>, keithe@tekgvs.LABS.TEK.COM (Keith Ericson) writes:
>
> We prefer SCSI: a 15 Mbit/sec drive will usually turn in a CORE27 timing of
> about 1.4 megabytes/sec transfer rate. The 15 Mbit/sec ESDI do essentially
> the same. (This with Adaptec controllers: 1542A for SCSI; 2322B-8 for ESDI.
> The only WD adapter I've tried was an EDSI that I _think_ wasn't rated for
> 15Mbit/sec, so the results aren't valid...)
Core test is a bad benchmark with SCSI drives due to the embedded buffing
on the drive. The only true way to bench SCSI devices is by timing the
transfer of large blocks of data.
I also use a 1542A with a Miniscribe 9380S SCSI drive. The drive is rather
slow - but throughput runs at 1.2 megabytes/sec under 386/ix.
--
The Northern Star Public Access Unix Site, Notre Dame, Indiana USA
uucp: iuvax!ndmath!nstar!larry internet: larry@nstar
USR HST 219-287-9020 * PEP 219-289-3745 * Hayes V9600 219-289-0286
Technical Details
Message-ID:
<511254@nstar.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!iuvax!ndcheg!ndmath!nstar!larryReferences:
<9027@ingr.com> <6991@tekgvs.LABS.TEK.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!iuvax!ndcheg!ndmath!nstar!larry From: larry@nstar.UUCP (Larry Snyder) Newsgroups: comp.sys.ibm.pc Subject: Re: Perstor comments wanted. Summary: SCSI driver Message-ID: <511254@nstar.UUCP> Date: 6 Mar 90 01:27:11 GMT References: <9027@ingr.com> <6991@tekgvs.LABS.TEK.COM> Organization: Northern Star, Notre Dame, IN USA Lines: 21