Re: MSC, Devices, and 0x1a

Article View: comp.sys.ibm.pc

Article #43542

#43542

From: Christopher D. Brown
Date: Tue, 06 Mar 1990 13:32

45 lines
1659 bytes

In article <10521@ttidca.TTI.COM> woodside@ttidca.tti.com (George Woodside) writes:
>When a binary file is opened under MSC (5.1), and the file name is a
[edited}
>In reality, when a binary data stream (a graphic image) to a printer
>contains an 0x1a character, the output is truncated, and eventually the
>subsequent write calls will return a file write error. 
>
[edited}

After opening the file you need to use the DOS IOCTL Get Device Information
function to check for a character device and the DOS IOCTL Set Device
Information to set the character device to raw mode.

SetRawMode( int Handle )
{
   union REGS
      Regs;
   Regs.x.ax = 0x4400;
   Regs.x.bx = Handle;
   intdos( &Regs, &Regs );
   if ( !Regs.cflag )
   {
      if ( Regs.x.dx & 0x0080 )
      {
         Regs.x.ax = 0x4401;
         Regs.x.bx = Handle;
         Regs.x.dx &= 0x00AF;
         intdos( &Regs, &Regs );
      }
   }
}


-----
Christopher D. Brown

Digital: {uunet|texbell|cs.utexas.edu}!execu!cb
Analog: (512) 327-7070
Physical: Execucom, 108 Wild Basin Road, Two Wild Basin, Austin, TX 78764
-- 
Christopher D. Brown

Digital: {uunet|texbell|cs.utexas.edu}!execu!cb
Analog: (512) 327-7070
Physical: Execucom, 108 Wild Basin Road, Two Wild Basin, Austin, TX 78764

Technical Details

Message-ID: <10234@sequoia.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!execu!sequoia!cb

References: <10521@ttidca.TTI.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!execu!sequoia!cb
From: cb@sequoia.UUCP (Christopher D. Brown)
Newsgroups: comp.sys.ibm.pc
Subject: Re: MSC, Devices, and 0x1a
Message-ID: <10234@sequoia.UUCP>
Date: 6 Mar 90 13:32:49 GMT
References: <10521@ttidca.TTI.COM>
Reply-To: cb@sequoia.UUCP ()
Organization: Execucom Systems Corp., Austin, Texas
Lines: 45

Reply to Parent Message