Need jumper setting on HP 4mm for Mac

Thread View: comp.sys.mac.hardware.storage

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Laura Mitchell Thu, 09 Nov 1995 18:58

#48

Author: Laura Mitchell
Date: Thu, 09 Nov 1995 18:58

11 lines
628 bytes

I need to get jumper settings for an HP 4mm tape drive, model# HPC1533
so that it will work with a Macintosh.  Unfortunately, the manual has
information for DEC, SUN, SGI, etc, but nothing for Macs.

Send email to :

mitchell@owl.csusm.edu


Thanks,
Laura

Re: Need jumper setting on HP 4mm for Mac

#47

Author: Al Slater
Date: Fri, 10 Nov 1995 11:55

11 lines
1008 bytes

Laura Mitchell (mitchell@coyote.csusm.edu) wrote:
: I need to get jumper settings for an HP 4mm tape drive, model# HPC1533
: so that it will work with a Macintosh.  Unfortunately, the manual has
: information for DEC, SUN, SGI, etc, but nothing for Macs.

Switch settings should be:
11011111
Switch 3 On to disable MRS.

cheers,
al

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads