Powerbook 3400c and Quicktake 200 camera problem

Thread View: comp.sys.mac.portables

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Will Howard Tue, 06 Oct 1998 00:00

#103

Author: Will Howard
Date: Tue, 06 Oct 1998 00:00

11 lines
1506 bytes

System: PB3400c 64mb RAM, 2GB HD, System 8.1
Quicktake 200 camera and Quicktake 200 software 1.0

Problem: after installing the Quicktake software (with all extensions off)
and restarting, I can't get the computer to recognize the camera. I keep
gettinog  a message that something else may be using the modem/printer
port. The only device that uses that port on that system is a HP
Deskwriter printer, and I've unplugged that and disabled those drivers
using Extensions Manager.  I have a modem, but it's the PC Card variety,
not the built-in Ethernet/Modem card that comes with U.S. models of the
PB3400. Any ideas what I'm missing or need to have present? Thanks.

Re: Powerbook 3400c and Quicktake 200 camera problem

#104

Author: Andrew Eordogh
Date: Tue, 06 Oct 1998 00:00

22 lines
2042 bytes

In article <Will.Howard-0610981651140001@alberta.antcrc.utas.edu.au>,
Will.Howard@utas.edu.au (Will Howard) wrote:

> System: PB3400c 64mb RAM, 2GB HD, System 8.1
> Quicktake 200 camera and Quicktake 200 software 1.0
> 
> Problem: after installing the Quicktake software (with all extensions off)
> and restarting, I can't get the computer to recognize the camera. I keep
> gettinog  a message that something else may be using the modem/printer
> port. The only device that uses that port on that system is a HP
> Deskwriter printer, and I've unplugged that and disabled those drivers
> using Extensions Manager.  I have a modem, but it's the PC Card variety,
> not the built-in Ethernet/Modem card that comes with U.S. models of the
> PB3400. Any ideas what I'm missing or need to have present? Thanks.

Disable Appletalk in the Chooser.

______________________________________________________________________________ 
Andrew Eordogh               Sydney, Australia               andrewe@tig.com.au
Macintosh graphic systems                                        WWW developer
software & training consultancy                                        Fun guy
______________________________________________________________________________

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads