Mac II Interlace video INIT

Article View: comp.sys.mac

Article #25335

#25335

From: Mike Blackwell
Date: Mon, 15 Feb 1988 19:59

12 lines
936 bytes

I've taken the little routine which has been floating around for setting a
Mac II video card to interlace mode (some times incorrectly refered to as
NTSC mode), and bundled it into an INIT. I've sent the INIT, along with the
MPW source, to comp.binaries.mac. It is hardwired to a particular NuBus slot
(slot 2 in my case), and includes LSR's ShowInit resource to display the
icon. No frills, but it's handy...

		Mike Blackwell		mkb@rover.ri.cmu.edu
		The Robotics Institute
		Carnegie-Mellon University
		Pittsburgh, PA, 15213

Technical Details

Message-ID: <875@PT.CS.CMU.EDU>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!bbn!rochester!PT.CS.CMU.EDU!ROVER.RI.CMU.EDU!mkb

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!bbn!rochester!PT.CS.CMU.EDU!ROVER.RI.CMU.EDU!mkb
From: mkb@ROVER.RI.CMU.EDU (Mike Blackwell)
Newsgroups: comp.sys.mac
Subject: Mac II Interlace video INIT
Message-ID: <875@PT.CS.CMU.EDU>
Date: 15 Feb 88 19:59:23 GMT
Sender: netnews@PT.CS.CMU.EDU
Reply-To: mkb@rover.ri.cmu.edu (Mike Blackwell)
Organization: Carnegie-Mellon University, CS/RI
Lines: 12