Re: 6.0.4 flames

Article View: comp.sys.mac

Article #7275

#7275

From: David Goldsmith
Date: Sat, 28 Oct 1989 01:05

15 lines
1040 bytes

In article <5760@shlump.nac.dec.com> phil@vaxphw.enet.dec.com (Phil Hunt) 
writes:
> Docs say Ether usage for Appletalk will no longer interfere with printer
> port.   Well, it still does!!  I see no difference on the serial port 
already
> opened even though I use an Etherport II Board...

You must be using EtherTalk 2.0 to get your printer port back.  Just 
installing 6.0.4 won't do it.

David Goldsmith                                      Apple Computer, Inc.
AppleLink: GOLDSMITH1    BIX: dgoldsmith    20525 Mariani Avenue, MS: 77A
UUCP: {nsc,dual,sun,voder,ucbvax!mtxinu}!apple!dgold  Cupertino, CA 95014
Internet: dgold@apple.com

Technical Details

Message-ID: <4949@internal.Apple.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!apple!apple.com!dgold

References: <5760@shlump.nac.dec.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!gem.mps.ohio-state.edu!apple!apple.com!dgold
From: dgold@apple.com (David Goldsmith)
Newsgroups: comp.sys.mac
Subject: Re: 6.0.4 flames
Message-ID: <4949@internal.Apple.COM>
Date: 28 Oct 89 01:05:15 GMT
References: <5760@shlump.nac.dec.com>
Sender: usenet@Apple.COM
Organization: Apple Computer, Inc.
Lines: 15

Reply to Parent Message