MacTCP Config?

Article View: comp.sys.mac

Article #5064

#5064

From: john howell
Date: Fri, 22 Sep 1989 16:52

30 lines
1584 bytes

Help!

I just received MacTCP v1.0 from APDA and con't seem to get it installed
on my machine correctly.

I have a Mac ][ with an Apple Ethertalk card in it and ethertalk v1.1.
I am directly connected to am ethernet using Class C addresses and I am
trying to connect to a Sun w/ address 192.0.0.1.  My assigned address is
192.0.0.81.  When I run NCSA Telnet (non MacTCP), it works great! But if
I try to run NCSA Telnet MacTCP it loads and immediately quits.  I have
also tried the TCP XCMD Example and it comes up with a 
"domain name resolver failed" message and if I choose ActiveOpen I get a
"The Result: driver open failed" message.  These seem to happen no
matter what I put in for a Name or dot address.

In the MacTCP control panel I have selected the Ethernet icon, Manually
obtain address, class C address and node 81.

Anyone have an idea of what I may be doing wrong?

Thanks for your help!


========================================================================
John Howell			uucp:		uunet!suntc!jrh
Deere & Company			MCImail:	360-4047
Technical Center		CompuServe:	[76666,2505]
3300 River Drive		FAX:		(309)765-3807
Moline, IL  61265		Voice:		(309)765-3784
========================================================================

Technical Details

Message-ID: <118@suntc.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!suntc!jh34607

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!suntc!jh34607
From: jh34607@suntc.UUCP (john howell)
Newsgroups: comp.sys.mac
Subject: MacTCP Config?
Keywords: TCP/IP Mac MacTCP Config Ethernet Sun
Message-ID: <118@suntc.UUCP>
Date: 22 Sep 89 16:52:21 GMT
Organization: Deere & Co. Technical Center, Moline,IL
Lines: 30