sc: parity error

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Thomas Tschannen Fri, 13 Nov 1992 13:41

#1067

Author: Thomas Tschannen
Date: Fri, 13 Nov 1992 13:41

25 lines
1096 bytes

I've got a 1GB-disk from DEC (model DSP3085).

There were no problems to get it running. But after two weeks or so I got
the msg

sc: parity error 

at boot time (at the very begining).

The system is not able to access the disk nor to boot from the 
internal disk as long the external drive is connected. 
I've checked the drive on another host. But also there, same problem.

Current configuration:

NeXTcolorstation running NeXTStep 2.1 
SCSI ID 0 external disk 1GB (DEC)
        1 internal disk 400 MB
        7 CPU

Switching the external disk to ID 2 and reboot doesn't help.
What could cause this error msg ?

Thanks,
Thomas.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads