NCSA Telnet v. 2.3

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Eric Schwartz Sat, 26 Sep 1992 08:10

#1076

Author: Eric Schwartz
Date: Sat, 26 Sep 1992 08:10

18 lines
1186 bytes

I'm trying to hook up a PC XT with an EtherCard PLUS Elite (which includes
a WD8003 driver) to my NeXTstation.  So far I have version 2.3 of NCSA
Telnet installed on the PC, I am running the packet driver, and I have the
coax run from the NeXT to the PC, with terminators in place at each end.

I have no idea what the next step is.  What do I need to tell the NCSA
configuration file (CONFIG.TEL) so that it communicate with the NeXt,
and what should I tell the NeXT?  Do I need to reboot either/both of the
machines?

I've also heard that Sun's PC-NFS is another way to go with this setup,
though NCSA Telnet is all I could find for now.  If anyone can tell me
how to get my current setup working, then how to improve it or upgrade
it to something far superior, please let me know via e-mail.

Thanks,

Eric

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads